You are here

Eclipse ADAT FX Routing

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

3 posts / 0 new
Last post
belensky's picture
belensky
Joined: Jun 29 2017
Posts: 15

Eclipse ADAT FX Routing

belensky
June 19, 2020 - 09:46 am

Hello, I'm using My eventide Eclipse connceted via ADAT to UAD appolo. 

Can I somehow route FxA and FxB to different stereo ADAT outputs. So my DAW records each effect as separarte stereo track. 

Tags: 
nickrose's picture
Eventide Staff
nickrose
Joined: Jan 17 2008
Posts: 4582
nickrose
June 19, 2020 - 09:58 am

belensky wrote:

Can I somehow route FxA and FxB to different stereo ADAT outputs. 

Sorry, no. While the Eclipse has two internal stereo effects, it is essentially a two channel box, so you only get one stereo output.

This is why on UM p.27, the ADAT options are:

Thru The selected ADAT channel will carry the same signal that the corresponding ADAT input carried.
Mute The selected ADAT channel will carry silence.
Ch 1 The selected ADAT channel will carry the Eclipse’s channel 1 output.
Ch 2 The selected ADAT channel will carry the Eclipse’s channel 2 output.
 
belensky's picture
belensky
Joined: Jun 29 2017
Posts: 15
belensky
June 19, 2020 - 10:18 am

this is what i was suspecting. thank you for fast reply. 

BTW, I remeber my previos question about adat/spdf running at 96 you told it's not possibe. 

Somehow I managed  connect my eclipse at 48k and my sessions at 96, eclipse is clock, and everything is in sync. which is great. 

May I ask other question. is it possible to use midi out exacly same way as midi through. I need to split midi signal to two separate devices, and wondering if i can use MIDI out as my splitter,