You are here

H9 Quadravox and Diatonic Pitch Problem

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

8 posts / 0 new
Last post
wdunning
Joined: Mar 25 2016
Posts: 3

H9 Quadravox and Diatonic Pitch Problem

wdunning
March 25, 2016 - 11:21 am

Hi, I recently bought an H9 Core and have installed the Diatonic and Quadrovox algorithms.

Pitch A in Diatonic and Pitches A & B in Quadravox are currently making no sound. This is regardless of the preset I use, the balance between the pitches I set or any other setting. Pitches C/C+D are working correctly.

I have tried changing most of the pedal settings and everything else I can think of. Is there a fault with my pedal or am I missing something?

Bodde's picture
Bodde
Joined: Oct 26 2014
Posts: 269
Bodde
March 25, 2016 - 01:56 pm

My guess is that you have set pitch A and B to OFF (al the way to the left) in the Quadravox. And Pitch A mix in the Diatonic algo to A0+B10. Otherwise I can't find any logical explanation.

wdunning
Joined: Mar 25 2016
Posts: 3
wdunning
March 25, 2016 - 04:40 pm
bodde wrote:

My guess is that you have set pitch A and B to OFF (al the way to the left) in the Quadravox. And Pitch A mix in the Diatonic algo to A0+B10. Otherwise I can't find any logical explanation.

Nope, I've tried changing the mix. If I put it over to the A side and set mix to 100% it just makes no sound at all...

voodoojeff
Joined: May 11 2014
Posts: 36
voodoojeff
March 25, 2016 - 06:09 pm

just a shot in the dark, but check the internal routing settings. If it`s somehow on wet/dry you may sending that signal to the side of the H9 that isn`t plugged in (assuming you`re only using one of the outputs). 

wdunning
Joined: Mar 25 2016
Posts: 3
wdunning
March 25, 2016 - 08:28 pm
voodoojeff wrote:

just a shot in the dark, but check the internal routing settings. If it`s somehow on wet/dry you may sending that signal to the side of the H9 that isn`t plugged in (assuming you`re only using one of the outputs). 

Nope, tried it... So I'm guessing the pedals a goner?

wedelich's picture
Eventide Staff
wedelich
Joined: Oct 20 2008
Posts: 409
wedelich
March 28, 2016 - 02:19 pm

wdunning wrote:

Hi, I recently bought an H9 Core and have installed the Diatonic and Quadrovox algorithms. Pitch A in Diatonic and Pitches A & B in Quadravox are currently making no sound. This is regardless of the preset I use, the balance between the pitches I set or any other setting. Pitches C/C+D are working correctly. I have tried changing most of the pedal settings and everything else I can think of. Is there a fault with my pedal or am I missing something?

How is the pedal hooked up (physical cable wise)?  mono in mono out? mono in stereo out? stereo in stereo out? etc.  In any mono in case, if you accidentally plugged in input 2 instead of input 1 this exact situation would happen with those algorithms.  Have you double checked your setup? 

MrXpi
Joined: Aug 7 2020
Posts: 1
MrXpi
August 07, 2020 - 02:32 pm

wedelich wrote:

wdunning wrote:

Hi, I recently bought an H9 Core and have installed the Diatonic and Quadrovox algorithms. Pitch A in Diatonic and Pitches A & B in Quadravox are currently making no sound. This is regardless of the preset I use, the balance between the pitches I set or any other setting. Pitches C/C+D are working correctly. I have tried changing most of the pedal settings and everything else I can think of. Is there a fault with my pedal or am I missing something?

How is the pedal hooked up (physical cable wise)?  mono in mono out? mono in stereo out? stereo in stereo out? etc.  In any mono in case, if you accidentally plugged in input 2 instead of input 1 this exact situation would happen with those algorithms.  Have you double checked your setup? 

I'm having the same problem here. mono IN and stereo OUT. @wedelich can you help ??

bohan's picture
Eventide Staff
bohan
Joined: Jan 9 2018
Posts: 756
bohan
August 07, 2020 - 02:46 pm

MrXpi wrote:

I'm having the same problem here. mono IN and stereo OUT. @wedelich can you help ??

Make sure the Pitch Mix is set to the middle (A10+B10). Otherwise, if this happens on all presets in all pitch algorithms, you may want to reinstall the latest firmware and factory reset your H9.