You are here

3.1 -> 3.5 upgrade issue

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

2 posts / 0 new
Last post
erictfree
Joined: Jan 22 2011
Posts: 1

3.1 -> 3.5 upgrade issue

erictfree
January 26, 2011 - 12:26 am

I'm using a supported SanDisk 256MB card on my Eclipse, which is running 3.1, and the Eclipse seems to accept it just fine.

When trying to upgrade to 3.5 however the Eclipse doesn't respond to the 1 and 3 keys. I did load the 1.2 bootloader and that went as expected (I got all the way to the PROGRAMMING COMPLETE. CYCLE POWER. message, but still no response from the 1,3 keys on reboot).

I do see that the 2 key works and invokes the Update Utility (and if I had a serial port handy I'd try that ;)).

Any help on next steps?

Eric

nickrose's picture
Eventide Staff
nickrose
Joined: Jan 17 2008
Posts: 4582
nickrose
January 26, 2011 - 10:35 am

Try the upgrade again. Try it with a serial port.

If it still does not work, contact support@eventide.com.