You are here

Eclipse expression pedal status

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

3 posts / 0 new
Last post
depressor
Joined: Jan 31 2008
Posts: 3

Eclipse expression pedal status

November 05, 2017 - 12:46 pm

Hello,

Does the Eclipse immediately read the expression pedal stauts when I change the preset? When I change the preset, It seems that I have to move my espression pedal before it works correctly. I need that the Eclipse could read my expression pedal position before moving it.

Can you help me?

Thanks

nickrose's picture
Eventide Staff
nickrose
Joined: Jan 17 2008
Posts: 3993

Sorry - no obvious solution.

November 05, 2017 - 12:49 pm

Sorry - no obvious solution. Our goal is that a loaded preset sound the same as when it was saved it (for hopefully obvious reasons).

In many cases, the EXP pedal will not be in the same position, but we still want it to sound the same. So, you have to move the pedal for its state to be recognized.

 

 

depressor
Joined: Jan 31 2008
Posts: 3

nickrose wrote:

November 06, 2017 - 03:49 am

nickrose wrote:

Sorry - no obvious solution. Our goal is that a loaded preset sound the same as when it was saved it (for hopefully obvious reasons).

In many cases, the EXP pedal will not be in the same position, but we still want it to sound the same. So, you have to move the pedal for its state to be recognized.

 

 

Yes I understand it, but  the Eclipse is a professional unit, it should have a parameter that turns on/off the expression pedal status reading. It is very useful in some presets.