You are here

H3000 inputs/outputs, stereo imaging, XLR pin outs

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

1 post / 0 new
beefeheart
Joined: Sep 19 2020
Posts: 1

H3000 inputs/outputs, stereo imaging, XLR pin outs

beefeheart
September 19, 2020 - 08:00 am

Hi. Have read the manual, looked at FAQ. Contacted Eventide but they did not have an answer and suggested posting here.

Re. H3000. Trying to understand some of the operating protocols.

Stereo/Mono operation : for this to run as a mono in / stereo out unit should he be running a duplicate/mult of the mono input to achieve stereo output?

If feeding a true stereo input signal - from a stereo aux out bus including panning information - does that affect the stereo end result from the H3000. Are original panning positions retained or does it screw up things and you potentially end up with more of a mono end result?

I note the unusual pin out. If interfacing with regular ground/hot/cold wired equipment is it best to have a hot/cold/ground wired XLR at each of the H3000 connections but switch the wiring to ground/hot/cold at the inputs of the mixing desk? 

Thank you