You are here

I/O Question

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

4 posts / 0 new
Last post
tacman77
Joined: Jan 15 2008
Posts: 17

I/O Question

tacman77
February 04, 2008 - 10:06 am

I was wondering if I can use the light S/Pdif input and the coax S/Pdif output at the same time?

 Thanks

IDeangelis
Joined: Jan 9 2008
Posts: 1470
IDeangelis
February 04, 2008 - 10:24 am

Good question!

I think you should try; I personally don't see why it shouldn't work, w/the correct settings, unless internal hardware limitations put a stop to this.

Try setting DIG-IN to RCA and DIG-OUT>OPTICAL OUT to S/PDIF.

best

tacman77
Joined: Jan 15 2008
Posts: 17
tacman77
February 05, 2008 - 09:35 am

 It works. It wouldn't have if it didn't have all the setting choices. Nice.

So I can use that extra output I had sitting around and use the coax as a send to another effects unit that is coax only.

Cool.

IDeangelis
Joined: Jan 9 2008
Posts: 1470
IDeangelis
February 05, 2008 - 09:45 am

Nice!

from the User Manual:

All of the digital outputs send live signals all of the time! However, they only
send one protocol. Select that protocol under SETUP DIG-OUT FORMAT.
Under (CS-TYPE) select Pro if you are primarily interested in using the
XLR digital outputs, and Cns if you are primarily interested in using the
RCA or optical (non-ADAT) digital outputs.

 Idea