You are here

Strymon pedal after eventide eclipse in series

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

2 posts / 0 new
Last post
Malone
Joined: Nov 16 2016
Posts: 1

Strymon pedal after eventide eclipse in series

November 27, 2019 - 07:26 pm

Hi there,

The question is simple; can I use a Strymon pedal after the eventide eclipse?
Two scenarios:

1- series
2- using a line mixer like the custom audio electronics in which the 1st mix (with the eventide) feeds the 2nd mix (with the Strymon)

Also, can I use guitar pedals that accept line level (ex. Eventide stomp, H9’s, Strymon ...) after a torpedo live line out then into a line mixer and finally through a owner amp? Kind of like replacing the 80s rack units with new pedals.

Thanks

nickrose's picture
Eventide Staff
nickrose
Joined: Jan 17 2008
Posts: 4418
December 06, 2019 - 02:29 pm

I think you'll have to try it and see. Use the 1/4" jack outputs from the Eclipse to avoid balancing issues.

Full level on the Eclipse will be more than the Strymon can handle, so you'll need to play with levels.