You are here

Active button on Aux Switch

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

5 posts / 0 new
Last post
mustafaicil
Joined: Feb 10 2018
Posts: 45

Active button on Aux Switch

July 30, 2018 - 04:55 pm

How can I setup one of the Aux switch buttons as the Active button on the pedal? There is a Bypass option but it is not acting exactly as the Active button which activates the chosen preset. Bypass first deactivates and then activates the preset chosen by switches.

bohan's picture
Eventide Staff
bohan
Joined: Jan 9 2018
Posts: 393
July 30, 2018 - 10:00 pm

mustafaicil wrote:

How can I setup one of the Aux switch buttons as the Active button on the pedal? There is a Bypass option but it is not acting exactly as the Active button which activates the chosen preset. Bypass first deactivates and then activates the preset chosen by switches.

You can assign your aux switch to "Left Footswitch". See attachments for more detail.

mustafaicil
Joined: Feb 10 2018
Posts: 45
July 31, 2018 - 03:17 am

How did I miss that?! Thanks.

bohan wrote:

mustafaicil wrote:

How can I setup one of the Aux switch buttons as the Active button on the pedal? There is a Bypass option but it is not acting exactly as the Active button which activates the chosen preset. Bypass first deactivates and then activates the preset chosen by switches.

You can assign your aux switch to "Left Footswitch". See attachments for more detail.

fportaro
Joined: May 9 2018
Posts: 1
March 06, 2019 - 09:24 am

Hi,

I have the OX9 and the Tesla Tap for my Eventide H9. I am having a problem with the mapping and am wondering if you can help.

I want to set it up as follows. 

Left button on the OX9 to decreases through the presets

Right button on the OX9 to increase through the presets

Tesla Tap toggle the tuner on and off.

 

What seems to be happening is that whatever I have mapped to the foot switch 1 (Tip) and than foot switch 3 (tip + ring) the end up controlling the same thing.

SO if FS 1 (tip ) is set to increase through the Presets and FS 3 (tip+ring) is set to Tuner toggle both of the FS's control the tuner toggle.

 

What am I missing any advice would be greatly appreciated. 

brock's picture
brock
Joined: Jan 3 2010
Posts: 897
March 06, 2019 - 11:21 am

fportaro wrote:

What am I missing any advice would be greatly appreciated.

Is this slide switch on the left side of the OX9 set to the back position?

https://static1.squarespace.com/static/539f0880e4b0e0318ea3192f/t/5940029fb8a79bde2d979ab5/1497367242457/OX9-Manual-2017.pdf