You are here

Building a custom Auxswitch interface!

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

1 post / 0 new
Joined: Sep 27 2009
Posts: 8

Building a custom Auxswitch interface!

July 20, 2010 - 03:06 pm

Hey friends!

I found a dusty old digitech mc 7 midi controller in my basement. After good 15 minutes of planning banks and patches, I realized that the digitech would be an optimal foot controller choice for my two factor and amp switching pedal board! I opened the chassis and it has a lot of space inside!

It would be possible drill 4 holes for aux-switches and some interfacing jacks!

If someone with knowledge in all this "tip-ring-sleeve-ground" -stuff would help me out here! This is the configuration I would use:

Timefactor auxswitch out to digitech "custom aux in 1"

Modfactor auxswitch out to digitech "custom aux in 2"

In the digithech there is space for 4 switches! I would use 2 for each factor, so here is the tricky part:

would it be possible to have a third jack in the digitech for a "tap tempo in", that would be a shared switch for both MF and TF, as both of them have one auxswitch left unused?

Thanks in advance!