You are here

Can you control TimeFactor from ModFactor or Vice Versa?

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

2 posts / 0 new
Last post
Mike33
Joined: Jan 18 2008
Posts: 8

Can you control TimeFactor from ModFactor or Vice Versa?

March 02, 2008 - 05:10 pm

I read this in the TimeFactor FAQ:

Can you control TimeFactor from ModFactor or Vice Versa?

"Yes. If you connect the two pedals together via MIDI, you can use the footswitches from one pedal to change patches on the other, and you can use the knobs on one pedal to change values on the other."

Is it possible to connect the expression pedal let's say to the Timefactor and control the Modfactor with it as well? Or do I have to use two expression pedals? Of course I would connect the two pedals together via MIDI.

Thanks

Michael

nickrose's picture
Eventide Staff
nickrose
Joined: Jan 17 2008
Posts: 4350
March 03, 2008 - 11:38 am

 You could actually just connect one pedal to both units with a Y-cord.

The pedal input is protected enough that this won't damage the units. 

There is a slight risk of ground loops, but if the units are going to be connected together anyhow this should not be an issue. 

 Note - I have not tried this ...