You are here

H9 Option for Banks Using Aux Switch

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

3 posts / 0 new
Last post
bnjiman
Joined: Oct 19 2013
Posts: 5

H9 Option for Banks Using Aux Switch

October 30, 2019 - 11:27 am

Hi Folks,

 

I've been loving my H9 Max for the last few years, and before that my Space. 

In terms of control, I've had a few midi based units all the way up to a Fractal MFC101 with 17 buttons arranged into 4 banks = 51 presets.

I'm thinking that was overkill and maybe an old Midi Moose could work (5 butttons with 2 bank up/down switches).

I've recently come across the following approach which uses three buttons very neatly. 

Could this be implemented and mapped against a three button footswitch

Bank size: User Definable 

Number of banks: User Definable 

Aux1 - Up Bank

Aux2 - Down Bank

Aux 3 - Increase Preset within Bank

 

This would leave two switches on the H9 for activate etc.

 

A possible implementation would be 

Bank Size: 5

Presets per Bank: 2

This would give the user 10 presets at maxiumum of three presses away

Personally I could scale back to five main effects (Reverb1, Reverb2, Mod, Delay, Delay2)

with the 5 banks (Spring, Spring Trem, Room, Plate, Chorus, Univibe, Slap Delay, Digital Delay, Vintage Delay, Spacetime)

 

Hope this could be a useful feature !!

 

Cheers 

 

Ben

 

 

bohan's picture
Eventide Staff
bohan
Joined: Jan 9 2018
Posts: 417
October 31, 2019 - 03:27 pm
You should be able to set up your Fractal MFC101 or Midi Moose in a way that certain banks and presets send certain PC numbers, which can recall presets on H9 accordingly. Then what you need to do is only to put those algorithms/presets in your H9 in an order as you wish.
bnjiman
Joined: Oct 19 2013
Posts: 5
November 03, 2019 - 02:45 am
bohan wrote:

You should be able to set up your Fractal MFC101 or Midi Moose in a way that certain banks and presets send certain PC numbers, which can recall presets on H9 accordingly. Then what you need to do is only to put those algorithms/presets in your H9 in an order as you wish.

Thanks for the reply. Yes this is possible however I don’t have the controllers at present. Hoping similar functionality could be achieved using a three way aux switch if the h9 could be programmed to support preset grouping.

Cheers
Ben