You are here

MIDI --> Timefactor --> Issue after V2.0.2b4

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

4 posts / 0 new
Last post
Mike33
Joined: Jan 18 2008
Posts: 8

MIDI --> Timefactor --> Issue after V2.0.2b4

Mike33
April 06, 2008 - 06:56 am

Hi

I updated my Timefactor with the newest release V2.0.2b4 and have now the following issue.

I switch the presets via MIDI. This works well for the first ten of presets but I can not switch presets from 11 to 20 via MIDI.
(I activated the presets from 11 to 20 via System Menu then Utility then Bank.)

Example: MIDI program change number 1 is preset 1:1, 
                MIDI program change number 2 is preset 1:2 etc...
            

but let's say MIDI program change number 30 should be preset 15:1 or something like that, but the Timefactor does not change the preset.

By the way. With the Modfactor this works...

Thanks

Michael 

achaput's picture
Eventide Staff
achaput
Joined: Jan 9 2008
Posts: 557
achaput
April 07, 2008 - 12:12 pm

Hi Michael,

I have tested this on my TimeFactor and found it to be working correctly. Have you looked at the RCV MAP menu under MIDI in System Mode? I wonder if the Presets higher than 10:2 are not assigned in your receieve map. Can you verifiy this?

Alan

Mike33
Joined: Jan 18 2008
Posts: 8
Mike33
April 07, 2008 - 02:56 pm

Thanks Alan for your answer. I will check this hopefully tomorrow or then on Thursday...

I will let you know if this was the issue. 

Michael 

Mike33
Joined: Jan 18 2008
Posts: 8
Mike33
April 12, 2008 - 04:53 am

Thanks Alan

This fixed my issue.

Regards

Michael