You are here

Rose pedal scrolling

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

5 posts / 0 new
Last post
jac
Joined: May 6 2008
Posts: 18

Rose pedal scrolling

jac
June 02, 2020 - 12:05 pm

I really would like PC or CC for scrolling up & down. Anyone else feel the same?

bohan's picture
Eventide Staff
bohan
Joined: Jan 9 2018
Posts: 733
bohan
June 02, 2020 - 02:13 pm

jac wrote:

I really would like PC or CC for scrolling up & down. Anyone else feel the same?

Rose does support MIDI PC. You may also use an aux switch to scroll up and down presets. More info:
https://com-eventide-drupaluserfiles.s3.amazonaws.com/download/file/Rose-QRG-Rv21.pdf
https://com-eventide-drupaluserfiles.s3.amazonaws.com/download/file/Rose%20MIDI%20Implementation%5B1%5D.pdf
https://www.eventideaudio.com/support/downloads/rose-user-guide-addendum-v3

jac
Joined: May 6 2008
Posts: 18
jac
June 02, 2020 - 02:51 pm
bohan wrote:

jac wrote:

I really would like PC or CC for scrolling up & down. Anyone else feel the same?

Rose does support MIDI PC. You may also use an aux switch to scroll up and down presets. More info:
https://com-eventide-drupaluserfiles.s3.amazonaws.com/download/file/Rose-QRG-Rv21.pdf
https://com-eventide-drupaluserfiles.s3.amazonaws.com/download/file/Rose%20MIDI%20Implementation%5B1%5D.pdf
https://www.eventideaudio.com/support/downloads/rose-user-guide-addendum-v3

Yes, I’m aware of all you mentioned. But, I only have room for a midi baby 3 on my board. Which is controlling my H9 & Rose. The Rose does accept PC commands but there’s nothing designated for up & down. My other issue is the MB3 doesn’t have a scroll mode. I wish the Rose had the midi capabilities of the h9.

brock's picture
brock
Joined: Jan 3 2010
Posts: 962
brock
June 02, 2020 - 08:30 pm

jac wrote:

... My other issue is the MB3 doesn’t have a scroll mode ....

Interested bystander, but no MB3 here.  Just working from the MIDI Baby 3 Editor, so correct me if I'm wrong.

I see a count & send option for a Program Change.  Start & Stop PC; Step; Count to configure.  That should get you incremental presets on a switch action, scrolling upward.  I don't see negative number entries, so I'm not so sure about scrolling down.

Send Single Value (or Send Counter?) could bring you back to a starting point preset [PC #1 of 25, for example).  I don't see where that Editor currently supports programming more than one Main Footswitch, though.

jac
Joined: May 6 2008
Posts: 18
jac
June 02, 2020 - 10:57 pm
brock wrote:

jac wrote:

... My other issue is the MB3 doesn’t have a scroll mode ....

Interested bystander, but no MB3 here.  Just working from the MIDI Baby 3 Editor, so correct me if I'm wrong.

I see a count & send option for a Program Change.  Start & Stop PC; Step; Count to configure.  That should get you incremental presets on a switch action, scrolling upward.  I don't see negative number entries, so I'm not so sure about scrolling down.

Send Single Value (or Send Counter?) could bring you back to a starting point preset [PC #1 of 25, for example).  I don't see where that Editor currently supports programming more than one Main Footswitch, though.

So, I did what they recommend. You can send multiple PC commands (PC0 thru PC6) in sequence on one switch to scroll up on the MB3/Rose. Then I just assigned (0-6)PC numbers I wanted to H9 presets. But, there’s no scrolling down you have to cycle thru all 7 commands. With this method you lose the hold & long hold on MB3.
If the pedal had scrolling on a specific PC or CC number, you could just use those commands to scroll up/down. Then I could go to the H9 & just use the same PC or CC numbers as the Rose to scroll up/down.