You are here

Tap Tempo Issue

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

2 posts / 0 new
Last post
Joined: Jan 21 2008
Posts: 53

Tap Tempo Issue

February 10, 2008 - 02:06 pm
Hello! I noticed that when using the tap tempo it sums my delay into just one delay. Lets say I'm using the vintage delay with channel A set to 250 and channel B set to 500 and when I tap in the tempo it sums both to one. Is it possible to have both change accordingly? That is to be off set with the new tempo........ Thanks! John.....
achaput's picture
Eventide Staff
Joined: Jan 9 2008
Posts: 557
February 12, 2008 - 06:55 pm

 Hi John,

The way to do something like this would be to turn Tempo ON. This is done by pressing the Encoder button once. Then you can set the delays to different rhythmic note values, such as a dotted eighth note and a quarter note, and when you tap tempo, the relationship between the two delays will remain.