You are here

V5 Beta for TimeFactor!

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

89 posts / 0 new
Last post
wedelich's picture
Eventide Staff
wedelich
Joined: Oct 20 2008
Posts: 410

V5 Beta for TimeFactor!

wedelich (Eventide Staff)
August 05, 2014 - 02:49 pm

V5.0 release of the software for TimeFactor is now available!  Please note that this is a beta release, and we suggest that you only install this software when you have time to fully evaluate it before a tour or gig.  Please report any problems you might find with the beta in the Stompboxes V5 Beta forum (http://forum.eventide.com/cs/forums/26.aspx)

 

The new software can be installed in one of two ways.  One, you can use the Eventide Update Utility to download and install the updates, or two, you can download and install H9 Control and H9 Control will launch a bundled application called the Eventide Direct Updater that will download and install the updates.  (Please note that when H9 Control launches the Eventide Direct Updater, the Updaters window may not spring to the front of other open application windows.)  H9 Control can be downloaded from the H9's support page:

 

http://eventide.com/AudioDivision/Support/Stompboxes/H9.aspx

 

The new TimeFactor release adds a new looper with a host of new features.  The new looper features:

*   Reverse play and record with immediate reverse playback

*   Seamless Varispeed overdubbing and loop playback over the full range of speeds from 200x to pause to reverse 200x

*   Real-time, non-destructive, loop head and tail trimming

*   Auto beat-quantization of footswitch actions in Tempo Mode.

*   Tempo Mode maintains real time intelligent beat sync even with speed changes or trimmed loop

*   MIDI clock sync to your drum machine or sequencer for locking your loop to the beat without drift

 

This release also makes it possible to use TimeFactor with the MacOSX and Windows versions of the H9 Control application. H9 Control, which was originally developed to support Eventide's H9, can be used to manage factory and user presets, multiple preset lists, and the system settings of TimeFactor. It is not possible, however, to use the H9 Control application to buy new algorithms for TimeFactor. The hardware for TimeFactor was not designed with this capability in mind, and it does not have enough storage space for additional algorithms.

 

H9 Control offers an improved user experience and more functionality than was previously available in the FactorLib application. We hope that you will find it to be a fast and intuitive way to create, manage and share your presets of your TimeFactor and to organize them into set lists when you would like to use TimeFactor in live performances. It also makes it faster and easier to adjust the system settings of your TimeFactor, especially when it comes to creating MIDI and auxilliary switch mappings.

 

After you install the upgrade to use your TimeFactor with H9 Control, keep your device connected to your computer via USB and launch H9 Control. H9 Control will ask you to enter your Eventide user name to verify that the device is registered to you. Once it has verified your registration, it will also give you two coupons for your TimeFactor that you can use to buy algorithms for an Eventide H9; if you have an Eventide H9 and you would like to be able to run some of your favorite TimeFactor algorithms on it, you can use these coupons to get them for free. (The coupons can be used for any algorithms however; not just the TimeFactor algorithms.) To use these coupons, you will need to connect your TimeFactor and your H9 device(s) to H9 Control at the same time and go to the algorithms store to make your purchases. We require your TimeFactor to be connected when the algorithm purchase is made so that we can be sure that YOU, the registered owner of your TimeFactor, is making the purchase and not someone else who might have guessed your username and password.

borisinger
Joined: Jan 19 2014
Posts: 38
borisinger
August 05, 2014 - 06:23 pm

when the algo available for H9????? can't wait to buy it!!

adistom
Joined: Jan 3 2009
Posts: 29
adistom
August 06, 2014 - 05:02 am

Hi Big Smile maybe i'm dumb but i can't find the software update on the site (beta v5)

badmelonfarmer's picture
badmelonfarmer
Joined: Jan 26 2009
Posts: 635
badmelonfarmer
August 06, 2014 - 05:33 am

The update is not a download from the website by the user .... you use the utility to update the TimeFactor or other Factor / H9.

I don't have a TimeFactor any more, but the way I used to update was using the Eventide Update Utility:-

http://www.eventide.com/AudioDivision/Support/Stompboxes/TimeFactor.aspx

 You may also use the H9 Control App to update it

http://www.eventide.com/AudioDivision/Support/Stompboxes/H9.aspx

if it were me, i would probably download H9 Control and install that and see if you can update it from that first.

sherbanico
Joined: Aug 9 2009
Posts: 10
sherbanico
August 06, 2014 - 01:55 pm

Thanks for this much anticipated update!

I only found one H9 coupon with my registered TimeFactor though... I experienced a couple of bugs while registering the stompbox but don't know if it's related.

Keep up the good work Eventide!

gkellum's picture
gkellum
Joined: Mar 2 2011
Posts: 2280
gkellum
August 06, 2014 - 02:50 pm
sherbanico:

I only found one H9 coupon with my registered TimeFactor though... I experienced a couple of bugs while registering the stompbox but don't know if it's related.

I just looked up your account. It looks like you used two coupons from your TimeFactor to buy Room and MangledVerb. If one of these purchases was a mistake, send an email to support@eventide.com, and we'll see what we can do.

mr. limbic
Joined: Dec 7 2012
Posts: 13
mr. limbic
August 06, 2014 - 05:09 pm

SO I just updated my Timefactor via H9 auto update and it erased all of my presets, what did I do???? I used a laptop fyi

mr. limbic
Joined: Dec 7 2012
Posts: 13
mr. limbic
August 06, 2014 - 05:26 pm

Also...I had deleted factorlib and have my presets saved there. I reinstalled factorlib, and when I open the pedal it says it is a modfactor. SO when I try to send the saved presets to the TF it says "cannot send TF presets to MF pedal." I downloaded factorlib from the timefactor support page as well. any ideas??

gkellum's picture
gkellum
Joined: Mar 2 2011
Posts: 2280
gkellum
August 06, 2014 - 05:37 pm

You should be able to import your backup of your presets in H9 Control.  Click on the Settings button in the bottom right hand corner of the app and go to Import Presets and Preset Lists.

mr. limbic
Joined: Dec 7 2012
Posts: 13
mr. limbic
August 06, 2014 - 05:51 pm

It wouldnt work, H9 editor kept auto-closing when I tried. I updated to the previous update and then I was able to transfer my presets back through factorlib, so you may have a bug that once you change to the new update your TF changes to read MF on factorlib and can no longer be used. I resaved my presets again and am updating now so I will let you know if they transfer, thanks

almesy
Joined: Feb 22 2009
Posts: 13
almesy
August 06, 2014 - 09:57 pm

I don't have an H9 yet, but plan on getting one.  When I update my Timefactor and get the Coupons, do they expire?  Can i use them later or should I wait and do the update when I have the H9 so I use the coupons right away?

dredman
Joined: Aug 21 2019
Posts: 2
dredman
August 07, 2014 - 12:33 am

Hello,

Updated my Timefactor with the H9 Mac software with no problem. Other than the NAMM YouTube video, are there any basic printed instructions on using the new looper features? Thanks!!!

niconaro
Joined: May 11 2008
Posts: 5
niconaro
August 07, 2014 - 05:26 am

can i rename preset on my macbook with the H9 software and export the adjustment on timefactor?

thank you

Nicolas

wedelich's picture
Eventide Staff
wedelich
Joined: Oct 20 2008
Posts: 410
wedelich
August 07, 2014 - 07:45 am

There should be an "info" tab on the upper right section of the Looper preset editor in H9 Control. Click in that to see the Looper manual. 

gkellum's picture
gkellum
Joined: Mar 2 2011
Posts: 2280
gkellum
August 09, 2014 - 08:21 am
Mr. Limbic:

It wouldnt work, H9 editor kept auto-closing when I tried.

Hey, when I first read this, I didn't understand what you're saying, but having talked to another user with the same problem I think I get it now.  When you were trying to import your syx file into H9 Control, the app was crashing when you tried to do this? If so, what operating system are you using H9 Control on?  I'd like to look at the presets file you were trying to import if you don't mind.  If you have a moment, please email me the syx file at my forum user name plus @eventide.com.  

Billy Foppiano
Joined: Sep 11 2008
Posts: 78
Billy Foppiano
August 11, 2014 - 10:49 am

Hm. No implementation on the Looper for the H9 control software on my Mac (Macbook) The algo doesn't show.

Also, crashing takes place when I try to import my Factor Lib program for TF. Worked for my MF.

By the way, just finished a recording , FEATURING my Space pedal. It MADE the recording.

I'll send a MP3.

Cheers,

Billy

gkellum's picture
gkellum
Joined: Mar 2 2011
Posts: 2280
gkellum
August 11, 2014 - 10:59 am
Billy Foppiano:

No implementation on the Looper for the H9 control software on my Mac (Macbook) The algo doesn't show.

Make sure that you have version 1.6 installed of H9 Control. You can check the version by clicking on the Settings button in the bottom right hand corner of the screen and going to About.
Billy Foppiano:
Also, crashing takes place when I try to import my Factor Lib program for TF. Worked for my MF.
What operating system are you using H9 Control on? This is the 3rd time someone has mentioned this problem but I haven't been able to reproduce it. If you don't mind sending me your syx file, I'd like to try it out myself; my email address is my forum user name plus @eventide.com.
Billy Foppiano:
By the way, just finished a recording , FEATURING my Space pedal. It MADE the recording.
Awesome!
benborman
Joined: Apr 14 2014
Posts: 8
benborman
August 11, 2014 - 04:36 pm

So far, I have had the TF crash (lock up) once while banking with a MIDI controller (Disaster Area). Second thing i noticed is that if you change the delay type on a preset and try to re-save it in its current position, is saves it with the generic delay type name.

Also, when banking into certain delays from other delays (presets) i encountered a loud squeal. I've had that happen before with my pedal, and changing some settings on the presets seems to help, but man is it alarming! Very loud and very high-pitched. Any ideas on what that is?

wedelich's picture
Eventide Staff
wedelich
Joined: Oct 20 2008
Posts: 410
wedelich
August 11, 2014 - 06:12 pm

Thanks for the bug reports benborman.  We'll check them out promptly!  

I don't have any immediate ideas about the squeal, but I imagine it has something to do with TimeFactor's Spillover (really more of a 'morph') between different delay algorithm/types.  Do you have Spillover on?  If so, does the squeal ever occur when you switch b/t presets of the same Delay algorithm/type?  

Billy Foppiano
Joined: Sep 11 2008
Posts: 78
Billy Foppiano
August 11, 2014 - 10:52 pm

Nothing but disaster for the Loop Algo. Flakey display, values jump around like a bunny, vari-speed acts like it's ON speed. Everything else fine. 

wedelich's picture
Eventide Staff
wedelich
Joined: Oct 20 2008
Posts: 410
wedelich
August 12, 2014 - 11:49 am

Hi Billy, 

Sorry you're having a hard time getting the looper going.  Can you be more specific about the problems you're having:

 Flakey display:  Which display, H9 Control, or the one on the Timefactor?  What specifically is making it flakey? 

Values jump around:  Which values are jumping around?  Are you talking about the display here or something else? 

vari-speed on Speed:  you'll have to be more specific, to what are you referring? 

Thanks

frabo
Joined: May 8 2014
Posts: 16
frabo
August 18, 2014 - 02:09 pm

HI,

control repeat with external midi CC 50 does not work anymore ! :-(

How can I assign the repeat function ?

Assign the left and the right footswitch is always controlling the left footswitch ! - bug?

thanks for help

frabo
Joined: May 8 2014
Posts: 16
frabo
August 18, 2014 - 02:42 pm

oh, sorry,

found it. 

I used a performance switch for that (have to set it up at the hardware)  ;-) 

But btw, is it possible to get the meters working ?

coirbidh_99's picture
coirbidh_99
Joined: Jan 21 2011
Posts: 55
coirbidh_99
August 18, 2014 - 02:55 pm

Given the way you've chosen to implement the Reverse feature, is it possible to independently toggle forward/reverse playing and normal speed/half speed?  My quick reading of the situation is that you'd have to assign separate footswitches to -100%, -50%, 50%, and 100% speed controls, which seems awfully cumbersome for live performance.

wedelich's picture
Eventide Staff
wedelich
Joined: Oct 20 2008
Posts: 410
wedelich
August 19, 2014 - 11:06 am

Hi coirbidh_99,

Good call.  With the current release you'd need an Aux switch and an Expression pedal, or as you said, use two Aux switches to do that.  HOWEVER, we recently anticipated that this was indeed cumbersome, so we've added an option to the Xnob (PLAYMODE) that let's you use the Play footswitch (middle one on TF) as direction toggle instead of a Play retrigger.  That way you only need one extra switch or expression pedal mapping to do the half speed.  We'll probably do another beta release with this new feature and some bug fixes shortly.   

frabo
Joined: May 8 2014
Posts: 16
frabo
August 21, 2014 - 12:29 pm

Hi,

my TF did not stored the pedal settings !

If I change something like the Bypass mode,the TF it is always at "DSP" after reboot 

?? 

nickrose's picture
Eventide Staff
nickrose
Joined: Jan 17 2008
Posts: 4702
nickrose
August 21, 2014 - 12:52 pm

Make sure you are using the correct power supply.

If you are, contact support@eventide.com

acsewalk
Joined: Mar 20 2014
Posts: 27
acsewalk
August 21, 2014 - 12:53 pm

You mean after the software update, or after every reboot?

Mine did this after the update, but once I changed everything back it stayed.

So far, I haven't found anything I need my TF to do that it can't.  Thanks for the update Eventide crew!

benborman
Joined: Apr 14 2014
Posts: 8
benborman
August 21, 2014 - 12:58 pm

Is there anything that limits the speed of scrolling through banks? It seems slower than I remember. There is a significant amount of latency when scrolling through patches, via MIDI at least. 

A quicker response time on that would be a welcome improvement! 

deltadog
Joined: Feb 3 2012
Posts: 6
deltadog
August 22, 2014 - 06:50 am

hey folks,

i´ve been checking the v5 beta  for a week now and with the new looper algo i´ve detected the following problems...

- recording was sometimes not working and only initializing helped out (happened about 2x within a week)

-midi clock is not working properly. tried it synced to a rme multi face via cubase/ableton & via alai mpc 2000/1000. when the time factor gets the start signal the timing is too late but with the 1st loop it syncs up well. only work around so far is volume down during the first loop round & then bringing the loop in later

-beat quantization of activate recording tap is not accurate. when recording and then restart the midi master you realize that the loop was not recorded from the 1st beat. tried different tapping timings between the last beat & the 1st beat but it seems like its not really synced to the clock when recording. only work around so far is recording a empty loop then restarting the master clock and overdub the empty loop with audio then it works fine. but even then when retriggerung the master clock its out of sync and the next time retriggering it works well again (happened sometimes...but not that often)

-the reaction of the timefactor is also not very fast when retriggering or stopping the master clock (stopping could also be more accurate not beatwise)

greetz

HellenButterlips
Joined: Aug 21 2014
Posts: 4
HellenButterlips
August 23, 2014 - 03:05 pm

I tried installing the update this morning using the Eventide Direct Updater in OS X Yosemite Public Beta 2. Everything seemed to work just fine, but after the device reboots when the update completes, the screen goes into a loop of flashing various parameters and values. I can tweak knobs and see some feedback, and if I hit the switches at the right time I can activate/bypass the effect, but it's mostly useless. Is this a bug in the firmware, or did I do something incorrectly during the update?

Note: I'm able to put it into Update mode and downgrade to 3.5 without issue...just really wanted to be part of the Beta Club.

Per
Joined: Sep 18 2013
Posts: 36
Per
August 25, 2014 - 05:22 am

One question as I just bought the H9 and will soon be able to use the looper. 

Does the looper have the choice to ping-pong the loop in playback. T.i from start to end, from end to start and so on. If not I would like to have that as request in a possible uppdate. Its very nice make the loop sound even smother, especially on more padlike sounds.

Per 

wedelich's picture
Eventide Staff
wedelich
Joined: Oct 20 2008
Posts: 410
wedelich
August 26, 2014 - 11:31 am

Hi deltadog, 

Thanks for taking the time to write up your experience.  I have a few questions, if you don't mind, that will help me get to the root of the issues you're seeing with the Looper.. 

1. Regarding "recording was sometimes not working" :  have you seen this again?  If possible, if you do, are you able recall exactly what you were doing and how you were trying to use the Looper?  Are you saying that even after switching to a different algorithm and then switching back to Looper the recording was not working?  Only a full pedal wide initialization did the trick?  

2. Regarding "midiclock is not working properly":  Are you able to give me step by step detail of what you did, and what occurs?  For example: 

Step 1: Connect TF to mpc via MIDI cable (MIDICLK IN should be set to ON)

Step2: put TimeFactor Looper in Tempo Mode

Step3: Start the drum machine to give the Looper a MIDI Start 

Step4: Press Record on Looper right before the Beat I want to start recording over

etc.....etc....

After the steps, what did you expect to happen? What actually happened?  

3. Regarding "beat quantization of activate recording tap is not accurate":  Are you sure you're getting a MIDI Start from your MIDI master device?  You might want to use Midiox or some MIDI monitor on a computer to be sure.  The Looper should wait until the start of the next beat after a record press if it's received a MIDI Start. If it's not doing this, it probably hasn't seen the MIDI Start.  Of course there could always be something else going on I'm not seeing on my end, so as with the previous case, a detailed step by step instruction to repeat the problem, along with what occurs, and what you expected will help me tremendously in diagnosing any possible issue.  

4. Regarding "the reaction of the timefactor is also not very fast when retriggering or stopping": The Looper will retrigger with a MIDI Start only, some DAWs and drum machines will only send the Start if you explicitly press Stop and then Start, and when just pressing Start to re-trigger will only send a MIDI song position pointer and/or a MIDI continue.  The Looper doesn't support these messages.  Also, would you prefer the Stop action of Looper to always be immediate, or are there some cases that it makes sense to do it beatwise? 

Thanks for all the help testing!  Also, feel free to post videos of any of these issues if you think that would help, but do me a favor and make them private, as we are still in beta and working out the rough edges.  

BerserkerRRC
Joined: Aug 26 2014
Posts: 1
BerserkerRRC
August 26, 2014 - 12:06 pm

I recently purchased a TimeFactor and so far I am pretty impressed with overall flexibility of the different algorithms.  I was curious about one request that seems to come up intermittantly concerning an internal solution/option for stacking the delays for mono signals.  I've been playing around with the patch cable method to force the two signals to run in series but I noticed that whenever I mistakenly come across a modulated preset, I end up with an earful of super screech/feedback which I would think an internal solution would protect against.  

acsewalk
Joined: Mar 20 2014
Posts: 27
acsewalk
August 27, 2014 - 09:01 am

Would love to see a delays in series option too if it's possible!

eeeskildsen
Joined: Aug 6 2013
Posts: 2
eeeskildsen
September 09, 2014 - 03:32 pm

Since updating my Timefactor to V5.0 the looper doesn't record any audio at all. I've done the update several times and that hasn't helped. I've tried controlling the pedal from H9 Control, and from the pedal itself. No difference. Everything else on the pedal works flawlessly. I'm starting to wonder if I am overseeing something myself, or even doing something wrong, as I haven't seen anybody else mentioning this issue. If someone could please shed some light on this, I'd be very happy. Thank you!

wedelich's picture
Eventide Staff
wedelich
Joined: Oct 20 2008
Posts: 410
wedelich
September 09, 2014 - 03:57 pm

Hi eeeskildsen, 

Sorry to hear you're having problems with the Looper.  A few questions to get us on the same page: 

1. What version of the .bam do you have is it 5.0.0beta[59] or is it something else?  I ask because we had an issue where the wrong build went out a few weeks ago.

2. Assuming you have the right version, what is your exact setup? i.e. what is before/after the TimeFactor, mono/stereo, etc.  

3. When you hit the Record button what happens on the Timefactor? Does it display the R> (with a running secs or beats counter) and you just don't hear any audio when you Play back, or does it just never go into the Recording State? 

bucks4
Joined: Nov 23 2013
Posts: 4
bucks4
September 13, 2014 - 06:36 am

hello, i have had a software upload problem. while using the H9 software to update my time factor it crashed, and now my time factor is sitting in update mode, and the H9 software does not see the pedal, it asks me to restart the pedal power cycling with the hot and right switches pushed down, the pedal then restarts blank, no lights at all, completely dead, can you please help. kind regards Chris

nickrose's picture
Eventide Staff
nickrose
Joined: Jan 17 2008
Posts: 4702
nickrose
September 13, 2014 - 01:46 pm

You should contact support@eventide.com. They will be able to sort you out. Give them your serial number and tell them what computer you have.

AFX2W1N
Joined: Jun 29 2014
Posts: 5
AFX2W1N
October 01, 2014 - 06:56 pm

Hello there, I have been having serious trouble updating my TimeFactor. Each time I attempt to do so, the screen glitches/ edits various parameters on it's own? This is very upsetting considering I chose eventide over Strymon STRICTLY for H9 control! :(

I have attempted the following which I obtained from this very forum:  

a few things to try, if you haven't already tried them...

 1. Ensure that the TimeFactor is registered to you in your Eventide account. If not, register it

2. Force the TimeFactor into update mode

"If the update is started but does not complete successfully, the pedal may not function properly. If the pedal does not properly start up, the Eventide Update Utility will not be able to communicate with it. In this case, it will be necessary to force the pedal into Update Mode by holding down the center switch while applying power. Once the word "UPDATE" appears on the display, restart the Eventide Update Utility and attempt the update again."

3. Perform a Factory Reset.. (you will lose settings and custom patches)

"To restore Factory Presets and all System Settings, power up while simultaneously pressing the Middle Footswitch and the Encoder until [INITIALIZING] scrolls across the Billboard display. CAUTION: This function will overwrite any Presets that you've saved. If you want to be able to restore one or more of your Presets you must first save them to a computer."

 

Once you have performed a Factory reset (no 3) ... try no 2 again.

 

———————————————————————————————————————————

 If you have access to a PC with Windows installed, could you try our other updater, oupdate? It oftentimes works when the other updaters fail.  You can download it from the following URL:

After you download this zip file, please do the following:

(1) Unzip the zip file.

(2) Restart your Factor pedal with the middle footswitch pressed and with the Factor pedal connected via USB to your Windows computer.  You should see the Factor pedal display the text UPDATE on its screen, indicating that it is in update mode.

(3) Launch the oupdate.exe executable.

(4) In oupdate click on the Midi Config tab and make sure that by the labels Input and Output your Factor pedal is selected.

(5) Click on the "Operate..." tab to go back to the main page.

(6) Click on "Send" to start transferring the update to your Factor pedal.  (If it gives you a communication error message, just click again;  sometimes it takes a few tries…)

 

————————————————————————————————————————————————————————————

 Please download the following file:

After you download this zip file, please do the following:

(1) Unzip the zip file.

(2) Restart your Factor pedal with the middle footswitch pressed and with the Factor pedal connected via USB to your Windows computer.  You should see the Factor pedal display the text UPDATE on its screen, indicating that it is in update mode.

(3) Launch the oupdate.exe executable.

(4) In oupdate click on the Midi Config tab and make sure that by the labels Input and Output your Factor pedal is selected.

(5) Click on the "Operate..." tab to go back to the main page.

(6) Select the file TJ_boot_209154.bam to use for the update.

(7) Click on "Send" to start transferring the update to your Factor pedal.  (If it gives you a communication error message, just click again;  sometimes it takes a few tries…)

 This update should be relatively quick — about 1 - 2 minutes.  After that’s done, you’ll have different updating software installed and you should now install the regular TimeFactor software.  So, you should go through basically the same process but this time select the file TimeFactor5.0.0beta[59].bam in the Operate screen.  That update will take longer — about seven minutes, but assuming everything works correctly after this is done, you’ll have the latest software and shouldn’t have any more trouble updating again.

If this doesn't work for you, please send an email to support@eventide.com, and we'll have to take things from there.

 

——————————————————————————————————————————————————————————————————————

I attempted to update from multiple previous versions of TimeFactor as well... 


I contacted (via phone AND email) support...and was told this

Hi Ryan

 "According to one of our engineers, the TimeFactor beta release that you installed has some issues on newer TimeFactor units, because they have a different type  of processor than older TimeFactors. The problem you’re describing is an issue we recently learned about and we’ll be posting a new beta release for the TimeFactor later this week that should address the issue."

That was nearly 2 months ago! (september 8th to be exact) WHAT is the/my problem exactly!?

AFX2W1N
Joined: Jun 29 2014
Posts: 5
AFX2W1N
October 02, 2014 - 01:00 pm

edit: nearly 1 month ago Stick out tongue

Kimmurray04
Joined: Mar 16 2012
Posts: 4
Kimmurray04
November 18, 2014 - 09:00 pm

has the vintage delay input clipping issue been resolved with this firmware update?

wedelich's picture
Eventide Staff
wedelich
Joined: Oct 20 2008
Posts: 410
wedelich
November 19, 2014 - 11:10 am

Please refresh me on what clipping issue you're talking about.  I thought you might have written about it before, but this is your first post under this username, so I'll need a forum link or a description of the issue.  

Thanks

cello323
Joined: Dec 10 2014
Posts: 2
cello323
December 10, 2014 - 12:20 pm

Hi. it is possible to connect the timefactor by bluetooth to h9 control with a Bluetooth-converter> usb?

gkellum's picture
gkellum
Joined: Mar 2 2011
Posts: 2280
gkellum
December 10, 2014 - 12:45 pm

You'd have to link to a specific product for us to even guess about this. No one here has done that, and I doubt there's anything on the market that can do this.

adistom
Joined: Jan 3 2009
Posts: 29
adistom
August 06, 2014 - 06:39 am

My bad, i've seen that just after my message! Thx anyway :)

badmelonfarmer's picture
badmelonfarmer
Joined: Jan 26 2009
Posts: 635
badmelonfarmer
August 06, 2014 - 06:49 am

no problem

enjoy

pauliusmm
Joined: Oct 25 2009
Posts: 68
pauliusmm
August 06, 2014 - 08:25 am

When for H9?

gkellum's picture
gkellum
Joined: Mar 2 2011
Posts: 2280
gkellum
August 06, 2014 - 10:57 am
pauliusmm:

When for H9?

Soon?  Soon!!!

badmelonfarmer's picture
badmelonfarmer
Joined: Jan 26 2009
Posts: 635
badmelonfarmer
August 06, 2014 - 11:13 am

Did you say "Soon"?

That is as little as I need of an excuse to post this....

[View:http://youtu.be/hnpILIIo9ek:550:0]

Enjoy!

sherbanico
Joined: Aug 9 2009
Posts: 10
sherbanico
August 06, 2014 - 03:11 pm

Thanks for the quick reply (as always)!

I'll email support right now.