You are here

Will 'pancake' or Right Angle Flat style connectors fit side by side on the H9?

Login to Post to Forums

You must be logged in to the Eventide website in order to post to our forums. If you do not have an account, you will need to create one. You may also reset your password.

3 posts / 0 new
Last post
cljfford
Joined: Mar 3 2017
Posts: 52

Will 'pancake' or Right Angle Flat style connectors fit side by side on the H9?

cljfford
May 17, 2017 - 10:06 am

I checked the stated measurments of the connectors below and don't think they'll fit but am wondering if anyone has tried it for real.

https://www.redco.com/Redco-Right-Angle-Flat-TS.html

jgoldbach's picture
jgoldbach
Joined: Jan 12 2015
Posts: 60
jgoldbach
May 17, 2017 - 10:05 am

You can use a pancake connector for every other jack only. For instance, input (1) and output (1) and expression, if you wish. They'll run semi-parallel to the floor but not completely, if that makes sense. So if you're running mono, no worries. On my small board I run mono and use the Reverb.com patch cables on my H9 with no problem. They have the same connector as the link you reference.

FWIW, on my larger pedal board I run pre/post (which requires both input and output jacks) and an OX9 in the expression jack, so I use the George L cables with their right angle connectors. Works very well. Hope this helps.

cljfford
Joined: Mar 3 2017
Posts: 52
cljfford
May 17, 2017 - 12:06 pm

Thank you for your reply!

 

jgoldbach wrote:

You can use a pancake connector for every other jack only. ...