You are here
Problem with Behringer FCB1010 MIDI foot controller
March 15, 2008 - 11:46 am
Not sure if there are any FCB1010 users out there but in case. My problem is that I created a really simple FCB1010 patch (using it's software editor). All the patch does is switch my SwitchBlade to program #1. The SwitchBlade is on MIDI channel 5, and the Eventide is on channel 1 (i.e. MIDI device ID set to 1). I do not (purposedly) send any program control or any MIDI info to the H7600, only the SwitchBlade. However, and in fact regardless of what device ID I assign to the H7600, this totally simple patch does send some MIDI info to the H7600, resulting in a change of preset to number 12 (Thru). I don't understand why. Overall, my 7600 is part of guitar rack MIDI chain that includes the SwitchBlade, and 3 other rack units set to different device ID's. All are connected via MIDI THRU. Is it possible that one of the se units, including the FCB1010 sends some MIDI message to all device ID's? I'm kinda stuck right now, because I can't use the pedal at all to control the H7600. Help appreciated. I will also post this on the FCB1010 Yahoo user group, but they have almost no Eventide owners out there.