You are here

PitchFlex

Changes the pitch of the incoming signal using either an expression pedal or H9 Control.

Videos

H9 Control View - Click (+) for more info

PitchFlex Algorithm Controls
Mix [MIX]
wet/dry mixer, 100% is all wet signal.
Pitch A/Pitch B Mix [PICHMX]
Controls the ratio of the level of Pitch A to Pitch B.
Set Pitch A with Exp Pedal in Heel Position [HEEL-A]
Sets pitch shift of voice A in the heel position. When 'OFF' is selected, the voice is muted at the heel position and the pitch is set to unison.
Set Pitch B with Exp Pedal in Heel Position [HEEL-B]
Sets pitch shift of voice B in the heel position. When 'OFF' is selected, the voice is muted at the heel position and the pitch is set to unison.
Heel-to-toe glissando [HTGLIS]
These parameters are for use when using an Auxiliary Switch to control the pitch change effect for voices A and B. Sets the time to move from 'heel' to 'toe.'' In Tempo Mode maximum is ½ note.
Toe-to-heel glissando [THGLIS]
Parameters for use when using an Auxiliary Switch to control the pitch change effect for voices A and B. The Delay A knob sets the time to move from the virtual 'toe' to the virtual 'heel.' The Delay B knob sets the time to move from 'heel' to 'toe.' In tempo Mode maximum is ½ note.
Low Pass Filter [LPF]
A low pass filter to 'darken' the effect.
Glissando Shape [SHAPE]
Controls the 'shape' that the pitch modulation follows when using the Flex Switch.
Set Pitch A with Exp Pedal in Toe Position [TOE-A]
Sets voice A’s pitch shift in the toe position. When 'OFF' is selected, the A pitch shifter is disabled at the toe position and toe is treated as unison.
Set Pitch B with Exp Pedal in Toe Position [TOE-B]
Sets voice B’s pitch shift in the toe position. When “OFF” is selected, the B pitch shifter is disabled at the toe position and toe is treated as unison.
Output Level
At 0 the output level is unaffected. Increase the output level of the effect by up to 20 dB or lower by 30 dB.
TEMPO ON / TEMPO OFF
Tempo is turned ON/OFF on the H9 by simultaneously pressing the Right Footswitch and the PRESETS button. With Tempo OFF, tapping can be used to adjust delay parameter values (displayed as milliseconds or Hz). With Tempo ON, tempo is in BPM.
Active
Turn effect on or off..
FLEX
Sweep the pitch shift from MIN to MAX of HOTKNOB..
TAP
If Tempo is ON, the display indicates the current tempo in BPM (30 to 500 BPM) while tapping and the Tap LED will blink at the BPM rate. If Tempo is OFF, the display indicates the parameter value (milliseconds for most algorithms).