You are here

Non Registered Parameter bugs

  • 100 Diatonic Shift
    • Quantize has communications problems.
    • User Scale 2 cannot be addressed by MIDI NR params.
    • Its messages are assigned to Scale 1.
  • 101 Layered Shift: OK
  • 102 Dual Shift
    • Display bug:  Delays have maximum of 500 msec, but is possible to dial in up to 1000 msec with knob (but not with keypad).

103 Stereo Shift: OK

  • 104 Reverse Shift
    • Opens with sustain in ON mode.
  • 105 Swept Combs
    • Input Mode doesn't switch back to MONO.
    • Glide Enable sometimes switches remotely but not locally (moving knob changes Max but not H3000)
  • 106 Swept Reverb: OK
  • 107 Reverb Factory
    • Gate Mode not setting disabled.
  • 108 Ultra-Tap
    • Fdback OK:  islider 49 1 100
    • Input Mode OK: mslider 5 1 1
    • Pans not correct offsets (send OK, receive not)
  • 109 Long Digiplex: OK
  • 110 Dual Digiplex
    • Repeat display gets wedged, but still works.
    • Input Mode doesn't reset MONO.
  • 111 Patch Factory
    • Q Factors wrong scaler on slider (number OK). There's a multiplier of 10 in the slider, no compensation.
    • Delay seems to go negative after 163.82 (drops back to zero) Using fslider 10. 100.
    • Scale 1 & 2 wrong offsets on sliders
  • 112 Stutter
    • Trigger 1 sends/receives as 0
    • Trigger 2 sends/receives as 1
    • Trigger 3 sends/receives as 2
    • Trigger 3 receives as 5
    • Trigger 4 sends/receives as 3
    • Trigger 3 receives as 6
    • Auto trigger sends as 4
    • Auto trigger receives as 0
    • Speed sends as 5
    • Speed receives as 1
    • Program sends as 6
    • Program type receives as 2
  • 113 Time Squeeze
    • Time wrong offset
  • 114 Dense Room

Pans OK:  H3000out

  • 115 Vocoder: OK
  • 116 Multi-Shift
    • GFdback wrong offset on slider (number OK)
    • Expert popups don't connect Knob to parameter. Must press button to get active param display and Knob transmission to work
    • Image menu wrong (=0)
  • 117 Band Delay
    • Gl Freq wrong offset for slider (number OK)
    • Fdback wrong offset for slider (number OK)
  • 118 String Modeller
    • Pitch wrong offset for slider (number OK)
    • Offset wrong offset for slider (number OK)
  • 119 Phaser: OK
  • 120 Studio Sampler
    • Pitch 1 receives and sends as 0
    • Pitch 2 receives and sends as 1 (but doesn't display)
    • Time 1 receives and sends as  2
    • Time 2 receives and sends as  3 (but doesn't display)
    • Attack 1 receives as 4 (but doesn't display)
    • Attack 1 sends as 22
    • Release 1 receives as 6 (but doesn't display)
    • Release 1 sends as 24
    • Attack 2 receives as 5 (but doesn't display)
    • Attack 2 sends as 23
    • Release 2 receives as 7 (but doesn't display)
    • Release 2 sends as 25
    • Play 1 receives as 1, 4, and 5
    • Play 2 receives as 3, 6, and 7
    • Play 1 doesn't send
    • Play 2 doesn't send
    • Edit Start 1 doesn't receive
    • Edit Start 1 sends as 25
    • Edit Stop 1 doesn't receive
    • Edit Stop 1 sends as 25
    • Edit Start 2 doesn't receive
    • Edit Start 2 sends as 25
    • Edit Stop 2 doesn't receive
    • Edit Stop 2 sends as 25
    • Note that sending as 25 causes H3000 front panel to freeze up
    • Mix receives as 8
    • Mix sends as 21
    • Audio Triggering  receives as 9 and 17
    • Audio Triggering sends as 9
    • Threshold 1  receives and sends as 10
    • Threshold 2  receives and sends as 11
    • MIDI Mode  receives and sends as 12
    • Base note receives as 13
    • Base note sends as 15
    • Base note 1 receives as 14
    • Base note 1 sends as 16
    • Base note 2 receives as 15
    • Base note 2 sends as 17
    • Split point receives as 16
    • Split point sends as 18
    • Drum trigger  receives and sends as 17
    • Sampling Mode receives and sends as 18
    • Record Mode receives and sends as 19

122 mod factory: OK