You are here

Reverb 2016 Support

Digital Input/Output

Digital Input Digital S/PDIF Input
Sample Rate: 44.1kHz - 48kHz (downsampled to 40kHz)
Connector: Coaxial, RCA type
Digital Input is selected via front panel switch.
Digital Output Digital S/PDIF output
Sample Rate: 44.1kHz or 48kHz with ext clock
Connector: Coaxial, RCA type
Digital output is always active at 44.1 kHz when not using digital input

Audio Input

Connectors 1/4" T/R/S phone jacks (2)
XLR 3-wire balanced (2)
Impedance +4dB/Bal switch position: 100kOhm
-10dB/Unbal switch position: 50K Ohms
Levels +4dB/Bal switch position:
2dBu min for full scale
+20dBu max
-10dB/Unbal switch position:
-14dBu min for full scale
+8dBu max

Audio Output

Connectors 1/4" T/R/S phone jacks (2)
XLR 3-wire balanced (2)
Impedance 125 Ohms, each side, balanced
Levels +18dBm max, full scale, balanced/unbalanced

General Audio

Frequency Response Dry 20Hz-20kHz, +/-1dB
Wet 20Hz-16kHz, +-1dB
Dynamic Range >90dB
20 Hz - 20 kHz, Non A-weighted
Sample Rate 40.0 kHz
Conversion 24 Bits A/D, 24 Bits D/A
Environment Operating temperature: 32° to 104°F (0° to 40°C)
Storage: –20° to 170°F (-30 to 75°C)
Relative humidity: 95% non-condensing
Throughput delay Less than 2 ms.
THD <=0.05%, 20Hz-20kHz
Crosstalk <=45db below full scale

Physical

Dimensions Width 19"
Depth 6"
Height 1.75"
Weight 9.5 pounds