H9000 Support

SNR (A Weighted):
44.1 kHz: >114dB
48 kHz: >114dB
96 kHz: >114dB

THD:
44.1 kHz: <0.002%
48 kHz: <0.002%
96 kHz: <0.002%

The H9000’s XLR analog audio output jacks are male. Pin #1 is ground. Pin #2 is +phase (hot) and pin #3 is -phase.

• 16 Channels of USB audio. 44.1 kHz - 96 kHz. USB can be used in conjunction with any other Digital I/O.
• AES DB-25: 8 channels of AES 24-bit at 44.1 kHz - 96 kHz. Tascam standard. 
• AES XLR: 2 channels of AES at 44.1 kHz - 96 kHz
• S/PDIF RCA: 2 channels at 44.1 kHz - 96 kHz 
• S/PDIF Optical: 2 channels (Only 44.1 kHZ and 48 kHz)
• Optical (Toslink): 8 channels of ADAT (Only 44.1 kHZ and 48 kHz)

Up to four foot pedals, or four 5V control voltage sources, or six foot switches, or combination.

2 TRS 1/4" inputs. The sleeve is ground reference, the ring is +5 volts (source), and the tip is an analog signal from 0 to 5 volts. Connect either foot switches, foot pedals, or control voltage sources.

2 isolated relay closures, rated at 30Vdc 1A. Relay #1 is connected between ring and sleeve, while Relay # 2 is connected between ring and tip. These connections are electrically isolated from the H9000.

5 pin DIN input, output, and thru 

USB A and USB B