You are here

pitchfactor

PitchFactor > Arabic scales / non-tempered scales

Forums

Hi all,

I was wondering if it would be possible to add arabic scale with quarter tone in the Pitch Factor.
The idea is not to have extra notes played on top but to down tune a little bit one or two specific notes.

Let say I want to play in Bayati (D E1/2b [half flat] F G A Bb C)
The solution would be to set the pedal to 100% wet with a Diatonic pitch shifter that does nothing on all notes exepct E that is down tuned of 50 cent.
For the arabic mode/maqam, I guess that 3/4 scales would cover lot of standards songs.

Replacing the MIDI Connectors on all the Factor Pedals

Forums

Hi Folks,

I have an idea for replacing the midi connectors on all my factor pedals.  I've been looking around at a better solution because I can't seem to fit all four pedals on a single drawer in my rack because of the midi connectors.

So, I started brainstorming and I thought to myself, why can't I just replace the midi connector with a different low-profile connector that has up to 5 lines of connections for data transfer?  So, it came to me that I could possibly replace it with a USB Micro type B connector like this one:

Pitchfactor help

Forums

I have a few questions. I run my wdw rig as such guitar- wah - 5150 - Weber mass-internal speakers - line out from mass- pitch factor (split output) - rotosphere a/b input - a/b outputs from rotosphere - carver mosfet 450- l/r 2x12 speaker cabs

My questions are
1.setting it so when the pitchfactor is off and all signals are dry from all speakers, getting the volume to be the same as when the pitchfactor is on

2. Getting the same sound out of the wet cabs as the dry speakers being as the Weber has an eq for the line out

Pitchfactor Irregularity

Forums

Hi there, big fan of the pitch factor but it seems to have been acting wierd on starting up. All the lights come on, even those on the led text display and then remain on. Eventually the PF sorts itself out and works as should, but this has lead to a few tense moments before shows which I could honestly do without sometimes! Does this sound like a software issue to you guys or has something happened to the box? I've had it for two months, and it has been kept in the pristinest of conditions so this is a little surprising to me.

Send MIDI CC from Space Hotswitch to Toggle Bypass on PitchFactor?

Forums

Hi! I'm working on setting up my rig. I have a few patches on my Space which I'd like to use in conjuction with the PitchFactor. I have MIDI going out form the Space and into the PitchFactor. What I'd like to do is have it so that when I toggle the hotswitch on the Space it goes to a specific patch on the Pitchfactor and turns it on. When I hit the hotswitch again, it would turn it off. Is this achieveable? If so, how?

Thanks!

Pitchfactor power adaptor

Forums

Hi all,

I have a Pitchfactor that I use on a daily basis. Yesterday I checked the voltage coming out of the power adaptor (an original one) and apparently is feeding almost 12V instead of 9V. Is that normal? I have used it for quite a while and never reported problems, but truth to be told now I am a bit worried. I also tried another one (not original) set at 9V and the pedal works ok.

Cheers,
Antonio

Featured Video: Artist Compilation Part 1

There are countless hit records where you can hear the signature Eventide sound. We've put together a small sample of some of our favorite artist interviews from the past few years.

Need cc# charts for TimeFactor, ModFactor, PitchFactor, and Space pedals

Forums

I need charts showing what all of the cc numbers are and what they are for for the Eventide ModFactor, TimeFactor, PitchFactor, and Space pedals. That info is not in the manuals.

 

Release Notes for v5.4.0

H9 V5.4 Manual Changes and ReleaseNotes

Tuner

If you are in PRE/POST mode when enabling the Tuner, the H9 will temporarily set the Routing to PRE. Similarly, INSWEL and OUTSWL will be temporarily disabled. All these will be restored on exiting the Tuner.

Killdry – Send/Return Loop

Setting Killdry on a preset-by-preset basis

Killdry can also be set on a preset-by-preset basis. The choices are:

Eventide Updates Entire Stompbox Line

Eventide Updates Entire Stompbox Line

Pre/Post routing and other features for its H9, ModFactor, TimeFactor, PitchFactor and Space stompboxes.