Audible click on Timefactor Looper in 1/2 speed mode.

Home › Forums › Products › Stompboxes › Audible click on Timefactor Looper in 1/2 speed mode.

  • This topic is empty.
Viewing 6 reply threads
  • Author
    Posts
    • December 22, 2010 at 6:58 am #107492
      beedoola
      Participant

        I've been noticing I get a click around the 8 second mark in a loop when looping at 1/2 speed – which gives you 24 seconds of looping. It doesn't seem to happen on any other speed setting, just the half speed. Anyone else encounter this?

      • April 16, 2011 at 7:00 pm #121955
        beedoola
        Participant

          bump. Can Etide help a bro out her?

        • April 18, 2011 at 5:14 pm #121964
          achaput
          Moderator

            Hmm haven't heard of this before. Looking into it. What software version are you using?

          • April 23, 2011 at 2:12 am #121990
            beedoola
            Participant

              3.0.0

              the click is very noticeable.

            • April 23, 2011 at 2:17 am #133297
              timothyhill

                Is that version 3 beta 1 or version 3 beta 16? If you look at the SW version in system mode, there should be a fourth digit, although you may have to wait for it to scroll.

              • April 25, 2011 at 3:52 am #133306
                beedoola
                Participant

                  I had 3.0.0, just updated to 3.0.0[16]

                  The click is still present when recording in 1/2 speed, around 8 seconds. If I record a loop with no audio – just hit record and then play at around say 11 seconds, you can hear the click around the 8 second mark, it is faint with this method but a lot louder when actually looping audio.

                • September 16, 2011 at 12:18 am #133818
                  beedoola
                  Participant

                    this issue is still occurring. Has Eventide had any other reports of this? It is really annoying.

                • Author
                  Posts
                Viewing 6 reply threads
                • You must be logged in to reply to this topic.