H9 to replace my Space and Timefactor

This topic is empty.

Viewing 2 reply threads

Author

Posts
- October 2, 2018 at 10:54 am #114976
  
  4_cuerdas
  Participant
  
  Hi,
  
  I use a Space and a Timefactor they are connected together via MIDI (Timefactor is the master) and I use as well an aux switch and a expression pedal. The aux switch is a digitech fsx3 and it is connected to the Timefactor to the bank down, tap tempo and infinite loop parameters, the expression pedal is also connected to the Timefactor. My question is, would I be able to use the H9 in the exact same way as my two stomp boxes? The main reason I want to replace the two stomp boxes with an H9 is because real state of my pedalboard.
  
  Is there somebody in the eventide community that can help med with some advice?
  
  Thanks in advance.
  
  Cheers!
- October 3, 2018 at 11:47 pm #150243
  
  bohan
  Moderator
  Eventide Staff
  
  4_cuerdas wrote:
  
  Would I be able to use the H9 in the exact same way as my two stomp boxes?
  
  Digitech fsx3 can work the exactly same way for the H9. But you can only use one algorithm on the H9. It cannot run a TimeFactor and a PitchFactor algorithms simultaneously.
  - October 4, 2018 at 7:23 am #150244
    
    4_cuerdas
    Participant
    
    bohan wrote:
    
    4_cuerdas wrote:
    
    Would I be able to use the H9 in the exact same way as my two stomp boxes?
    
    Digitech fsx3 can work the exactly same way for the H9. But you can only use one algorithm on the H9. It cannot run a TimeFactor and a PitchFactor algorithms simultaneously.
    
    I see, that is not a problem, I think that to be limited is a good thing. But do you know if it is possible to switch presets up and down with a MIDI pedal?
    Cheers
  - October 4, 2018 at 11:49 pm #150249
    
    bohan
    Moderator
    Eventide Staff
    
    4_cuerdas wrote:
    
    But do you know if it is possible to switch presets up and down with a MIDI pedal? Cheers
    
    Yes. You can easily assign functions of MIDI CC/PC messages in H9 Control (Pedal Settings -> MIDI Settings).
    
    If you haven't used it before, I recommend you check it out: https://www.eventideaudio.com/products/software/bluetooth/h9-control 
  - October 5, 2018 at 6:52 am #150250
    
    4_cuerdas
    Participant
    
    bohan wrote:
    
    4_cuerdas wrote:
    
    But do you know if it is possible to switch presets up and down with a MIDI pedal? Cheers
    
    Yes. You can easily assign functions of MIDI CC/PC messages in H9 Control (Pedal Settings -> MIDI Settings).
    
    If you haven't used it before, I recommend you check it out: https://www.eventideaudio.com/products/software/bluetooth/h9-control 
    
    Thanks!. The H9 is on ITS way !, I believe it will be in my hands by Saturday !:-)
- October 4, 2018 at 7:43 pm #150248
  
  Given To Fly
  Participant
  
  Yes
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.