SP2016 Reverb bypass problem Logic 9

This topic is empty.

Viewing 2 reply threads

Author

Posts
- October 29, 2018 at 11:09 am #115024
  frywolny
  Participant
  Hello
  
  Just installed (demo) SP2016 Reverb (Logic 9, OSX10.10.5) and encounter strange phasing issue when the plugin is on the bus and BYPASSED. It doesn’t occur if set on the insert. I compared it with SP2016 Stereo Room plugin and the problem doesn’t exist with this reverb.
  
  Does anyone have the same issue?
  
  Will check it soon on the other HD (Logic X, Sierra)
  
  Best
  
  Ziggi
- October 29, 2018 at 5:54 pm #150422
  tlongabaugh
  Moderator
  Eventide Staff
  Hey Ziggi-
  
  Are you using the bypass button in the SP2016 Reverb UI, or the Logic bypass button?
  
  -Tom
- October 29, 2018 at 6:12 pm #150424
  frywolny
  Participant
  Hi Tom
  In both situations (bypass in plugin or Logic) the effect is the same.
  Also, the sound of the direct signal (mix fader down) has the same phasing problem as with bypass button.
  
  Ziggi
  - October 31, 2018 at 6:57 pm #150437
    tlongabaugh
    Moderator
    Eventide Staff
    frywolny wrote:
    
    Hi Tom In both situations (bypass in plugin or Logic) the effect is the same. Also, the sound of the direct signal (mix fader down) has the same phasing problem as with bypass button. Ziggi
    
    Hey Ziggi-
    
    I just took a closer look at this – can you confirm that under Preferences -> Audio -> General -> Plug-in Latency, that Compensation is set to "All"? If it is set to "Off" or "Audio and Software Instrument Tracks", then you will hear phasing issues under the settings you describe, as SP2016 Reverb induces some latency, and uses Delay Compensation to offset this.
    
    -Tom
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.