MicroPitch Input/Output

Home › Forums › Products › Stompboxes › MicroPitch Input/Output

  • This topic is empty.
Viewing 3 reply threads
  • Author
    Posts
    • March 27, 2021 at 7:32 pm #116426
      Guitarfly025150

        Question(s) for the forum – what exactly do I get if I plug a standard TS cable into the input of the MicroPitch and the come out of both Output 1 and 2?

        If I have the little switch on Mono, am I getting two, Mono output signals? What if I move the switch to Stereo while using the TS input?

      • March 27, 2021 at 7:37 pm #157541
        joecozzi
        Moderator
        Eventide Staff
          Guitarfly025150 wrote:
          What exactly do I get if I plug a standard TS cable into the input of the MicroPitch and the come out of both Output 1 and 2?

          You get stereo sound. When switch is set to MONO, but both outputs are hooked up, you get stereo. Same with stereo in stereo out obviously.

          Guitarfly025150 wrote:
          If I have the little switch on Mono, am I getting two, Mono output signals? What if I move the switch to Stereo while using the TS input?

          Again, as long as both outputs are connected, you’re outputting in stereo, not dual mono. If you move the switch to stereo while only hooked up with a TS cable, you’re going to be missing right channel information and the pedal will not sound right. With this incorrect wiring, you’d have to move the Pitch Mix knob to one side to get any semblance of normal operation, but it would be mono and again, you’d be missing the processing of one of the voices.

        • March 27, 2021 at 7:42 pm #157542
          joecozzi
          Moderator
          Eventide Staff

            To elaborate on hooking the pedal up in stereo, while it was designed for mono compatibility, it really shines when run in stereo. The perceived width this algorithm generates is the stuff of magic, in my opinion.

          • March 27, 2021 at 8:51 pm #157543
            Guitarfly025150

              Thanks so much for the responses!

          • Author
            Posts
          Viewing 3 reply threads
          • You must be logged in to reply to this topic.