Heel-toe H9…

Home › Forums › Products › Stompboxes › Heel-toe H9…

Tagged: ,

Viewing 3 reply threads
  • Author
    Posts
    • September 6, 2022 at 5:50 pm #165372
      dtmcinto
      Participant

      Hi there,

      I haven’t been able to find this info yet- My expression pedal and aux switch are working fine with the H9. The issue I’m having is the heel position is 100 and the toe is 0.  Is it the cable I’m using (I have tried two and they are the same)?  I don’t see a setting to reverse the polarity on the H9 and there’s no expression pedal setting to that either.

      I’ve tried both the Dunlop DVP mini and DVP5.

       

      Thanks!

       

       

    • September 6, 2022 at 6:20 pm #165375
      dtmcinto
      Participant

      I should add – neither of the cables I tried are the recommended cables in the manual/online. One is from my other expression pedal  (red mission pedal).

      thx!

    • September 6, 2022 at 9:53 pm #165377
      joecozzi
      Moderator
      Eventide Staff

      Hi dtmcinto,

      The problem you are experiencing is because you are trying to use a TRS expression pedal in [BOTH] or Expression Pedal + Aux mode. This mode requires a TS expression pedal. Check out this video, which explains it clearly. It works the same with H9. It also explains how to make the custom cable you would need to make things work with your Dunlop pedals. Go to 9:50: https://m.youtube.com/watch?v=lfi0sbn5c5Y

    • September 7, 2022 at 8:32 am #165384
      dtmcinto
      Participant

      Perfect – thanks!

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.