H90 and HX Stomp power supply - Eventide Audio

H90 and HX Stomp power supply

Tagged: power supply

This topic has 3 replies, 3 voices, and was last updated 2 years, 8 months ago by zambiland.

Viewing 3 reply threads

Author

Posts
- February 9, 2024 at 3:34 pm #178063
  santisandoval89
  Participant
  Hi, I would as for some tips on connecting an H90 and an HX Stomp with the same power supply. Since the voltage and amount of current is so high on both units I don’t know if there is a lightweight (AND AFFORDABLE) alternative than using both bulky and heavy original adapters. Maybe something like an mxr, ojai, one spot? and if so, would it be neccesary to use some current doubler cable or something like that?
  
  Would appreciate some help! thanks in advance
- February 9, 2024 at 3:45 pm #178064
  joecozzi
  Moderator
  Eventide Staff
  Eventide PowerMini: https://www.eventideaudio.com/pedals/powermini/
  
  You would be able to power the H90 with one outlet running at 12V and the HX stomp with two outlets at 9V using a combination of these two cables:
  
  Flex 8800: https://store.eventideaudio.com/collections/cables/products/8800-parallel-adapter-flex-10cm-sand-grey
  
  Flex Type 3: https://store.eventideaudio.com/collections/cables/products/3050-flex-type-3-5-5-2-5mm-dc-plug-center-negative-angled-l-shape-50-cm
- February 9, 2024 at 3:56 pm #178066
  santisandoval89
  Participant
  Thanks for your help!
- February 11, 2024 at 5:43 pm #178107
  zambiland
  Participant
  I think a TrueTone CS12 should be able to handle it. It’s bigger and heavier than the PowerMini, but very robust and can mount under a pedalboard.
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.