Looper parameters keep resetting

Home › Forums › Products › Stompboxes › Looper parameters keep resetting

Tagged: 

  • This topic has 1 reply, 2 voices, and was last updated 1 year ago by brock.
Viewing 1 reply thread
  • Author
    Posts
    • June 6, 2024 at 12:35 pm #183067
      StrolloSound
      Participant

        Hello

         

        Having trouble with the looper setting “”Resolution” , “Max Length” and “Rec Speed”

        I have my preset saved so that when I power up I have:

        Resolution set to Smooth

        Max Length set to 60 sec

        Rec Speed at 2X

        Rec Speed is also mapped to HotKnob P

        When I record a loop, modify its speed, then stop and empty the loop,

        It seems that Resolution reverts to Octaves not Smooth

        Sometimes the Max Length will also change to 240s

        and the Rec Speed will reset to 1/2X

        Any insight as to why this would be happening?

         

        Thanks

         

      • June 7, 2024 at 8:38 am #183084
        brock
        Participant

          This might help with the expected behavior:

          https://www.eventideaudio.com/forums/topic/looper-oddity/#post-148873

          Also, the Looper has an extensive entry.  Lengthy, but you can find most everything in there:

          https://cdn.eventideaudio.com/manuals/h90/1.8.6/content/algorithms/looper.html

           

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.