H90 double stereo output routing

Home › Forums › Products › Stompboxes › H90 double stereo output routing

Tagged: 

Viewing 4 reply threads
  • Author
    Posts
    • April 10, 2025 at 7:52 am #189504
      Rexindigo
      Participant

        Hi, is it possible to do the following:

        -guitar goes into amp modeler

        – out of modeler stereo loop into stereo input H90

        – Stereo output (1+2) goes back to modeler stereo loop and (through Modeler CAB IR) into PA

        -Stereo output (3+4) goes into stereo power amp and stereo cab

        how do i have to set this up?

        thank you for any help, cheers REX

         

      • April 10, 2025 at 9:07 am #189508
        tbskoglund
        Keymaster
        Eventide Staff

          Hi Rex,

          Yes, this is possible using the H90’s insert routing.

          • Make your connections as described above
          • Press the Routing button on the H90 to access the Routing menu
          • Turn Quick Knob 3 clockwise until it enables a stereo insert
          • Turn Quick Knob 2 to place the stereo insert at the end of the H90 signal path
          • Turn the Perform Knob to get to the 2nd page of the Insert parameters.
          • Adjust the Insert Mix to be at 50% (if you don’t do this, there will be no output on 1-2)
          • Adjust the Send Level to change the volume of the signal for the stereo power amp/cab.

          More info about the insert routing can be found here: https://cdn.eventideaudio.com/manuals/h90/1.9.7/content/edit-modes/routing.html

          Let me know if you have any questions or issues with the setup.

        • April 10, 2025 at 9:41 am #189510
          Rexindigo
          Participant

            Hi tbskoglund,

            thank You for the fast reply.

            One last question:

            Can i set this up global, or do i have to configure this in evry patch?

            Thanks for your  help

          • April 10, 2025 at 9:59 am #189511
            tbskoglund
            Keymaster
            Eventide Staff

              You’re welcome. You’ll need to setup this routing for each Program.

              Using H90 Control, you could create this Program as your default, copy/paste it a few times on your Program list, and then create your new Programs from that default Program so you don’t have to keep adjusting the routing.

            • April 10, 2025 at 10:10 am #189512
              Rexindigo
              Participant

                Thank You very much!

            • Author
              Posts
            Viewing 4 reply threads
            • You must be logged in to reply to this topic.