H90 – Looper and Midi bug?

Home › Forums › Products › Stompboxes › H90 – Looper and Midi bug?

Viewing 2 reply threads
  • Author
    Posts
    • July 6, 2025 at 2:24 pm #190842
      madmac
      Participant

        Hi

        I’m having trouble getting the H90 Looper in FX slot B to respond to the correct MIDI CC control assignments from the Morningstar MC6 Pro

        The CC messages set to Switch B for Play, Record, Stop, Redo, and Erase work fine for the first press only. However, after the first press, H90 appears to become confused and responds only with the last received CC, regardless of the CC number sent.

        Running the latest H90 Control and firmware

         

        Control Assignment settings in H90 Control

        Switch B

        Play = CC#81

        Record = CC#80

        Stop = CC#79

        Undo/Redo = CC#86

        Erase = CC#85

         

        Morningstar MC6 pro

        All CC values set to send the value of 127

         

        Does the H90 also expect to see a CC value of 0 for some of these functions?

         

      • July 6, 2025 at 3:37 pm #190843
        brock
        Participant
          madmac wrote:

          … Morningstar MC6 pro All CC values set to send the value of 127…

          Try sending 127 on Press with 0 upon Release.

        • July 7, 2025 at 9:42 am #190846
          tbskoglund
          Keymaster
          Eventide Staff
            madmac wrote:

             Does the H90 also expect to see a CC value of 0 for some of these functions?

            Yes, you must set the MIDI CC to be 127 on press and 0 on release for the looper transport functions to work correctly.

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.