H90 Control – Create user preset

Select a blank program from a user bank (top left), you’ll see 2 blank presets.  Click on A (above the parameter box),  click on ‘presets’ (bottom right), select an effect type (eg delay) then the algorithm (eg  Digital Delay), then choose a preset from the list on the left.

OK so far?

Select B (where it says B above) and do the same for that one.

Adjust all the parameters to your liking.

Rename the prog and press ‘save’ (top right)

Simples.

The user Program list is for storing Programs, not Presets. Presets are stored in the Library, as mentioned in your manual link. I don’t have my H90 plugged into my PC at the moment so can’t check, but am pretty sure there’s a way to save the Presets at the top of each individual Preset (A & B) section in H90 Control, and you can also access the Library too. Probably worth reading this section of the manual:

https://cdn.eventideaudio.com/manuals/h90/1.11.4/content/h90-control/index.html

You’re looking for a drop down menu (●●●) with Save to Library under its selections.  #12 in this image …

https://cdn.eventideaudio.com/manuals/h90/1.11.4/_images/h90control_parameters.png

… or above #3 in this image:

https://cdn.eventideaudio.com/manuals/h90/1.11.4/_images/h90control_presets.png

Great.  We help each out out here.  I’ve been using H90 & Control since the release.  Quite frankly, I’m still finding new ways to use them, that seem so obvious once I’ve stumbled upon them.