Technical question about the Mixinglink

This topic has 4 replies, 2 voices, and was last updated 5 months ago by Hossbie.

Viewing 4 reply threads

Author

Posts
- October 17, 2025 at 7:56 am #192648
  Hossbie
  Participant
  Hello there folks,
  
  I am mounting my own pedalboard for my sax and other instruments. My initial pedal is the Mixinglink which goes into some mono effects and also to stereo ones like the H90, finishing into a Ditto X4 Looper that should return to the Mixinglink via stereo without loosing the amplitude achieved by the stereo pedals (H90, Strymon Decco, Iridium and Ditto x4 looper). My question here is how should I Return to the pedal? I guess the From FX jack input is meant to be mono? Maybe with a double jack from the Ditto’s pedal into an stereo mini jack to the aux in? Would that work? Is the best option? The point is to get into the PA and also Headphones out without loosing the stereo image.
  
  Thank you in advance for your help!
- October 17, 2025 at 9:33 am #192654
  tbskoglund
  Keymaster
  Eventide Staff
  Yes, you can use a dual 1/4 to 1/8 adapter connected to the stereo mini jack for the aux in, that is the only way to get a stereo signal back into the MixingLink.
- October 17, 2025 at 9:55 am #192656
  Hossbie
  Participant
  Ok thank you for the reply. I guess that then, the XLR DI/Line out gives the stereo out with just one balanced XLR cable right?
  
  That’s it. Thank you.
- October 17, 2025 at 10:00 am #192657
  tbskoglund
  Keymaster
  Eventide Staff
  Sorry no, the aux input signal is only stereo for the headphone output jack, it will be mono on the DI output.
  
  An alternative would be to send the stereo output of the Ditto signal directly to the PA, but you’d have to get your headphone mix from the PA or some other way.
- October 18, 2025 at 7:00 am #192666
  Hossbie
  Participant
  Ok, thank you for the clarification. Best.
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.