A question about using H90.

Home › Forums › Products › Stompboxes › A question about using H90.

Viewing 3 reply threads
  • Author
    Posts
    • November 24, 2025 at 7:59 am #193422
      myoungsoo jung
      Participant

        I’m controlling this product by stereo connecting it to a parallel mixer, but when I change the preset with the same switch, it is reloaded when reusing the same preset and causing a break in the middle.
        Can’t each preset be disconnected even when the trail function is turned on?

      • November 25, 2025 at 9:03 am #193451
        tbskoglund
        Keymaster
        Eventide Staff

          Can you please be more specific with what the issue is?

          What do you mean by “change the preset with the same switch” ? Are you sending Program Change messages to the H90 with a MIDI controller?

        • November 28, 2025 at 10:38 pm #193491
          myoungsoo jung
          Participant

            1. The device I’m using is music’s efx6, and h90 is connected to a parallel mixer and controlled as a midi.
            For example, if you set all the h90  1presets together on 1st to 5th in the switch and change the switch presets, the h90  1presets will be re-loaded every channel change, causing a disconnection in the middle. Can you remove the re-loading part when you bring back the same presets?

             

            *I’m also attaching a picture of the pedal board I’m using.

          • December 2, 2025 at 4:53 pm #193545
            tbskoglund
            Keymaster
            Eventide Staff

              Sorry, it’s still not clear to me what the issue you are having is.

              Please make a short video that demonstrates the issue and send it to support@eventideaudio.com and we can help you there.

          • Author
            Posts
          Viewing 3 reply threads
          • You must be logged in to reply to this topic.