H90 and IRX – Channel MIDI change

Thank you for your reply.

My knowledge of MIDI is quite limited.

I connected the H90 and the Friedman IRX using a 5-pin MIDI cable. I changed the output mode to Transmit and the PC offset setting to 1 (since the IRX works with PCs from 0 to 127). Furthermore, I left both on channel 1.

However, I couldn’t configure the controls so that changing a preset on the H90 by pressing one of the pedals also changes the channel/preset on the IRX.

I would like to know if it’s possible to do this without using any additional tools, just with the MIDI cable connection.

If so, how do I configure the H90 presets to correspond to a channel/preset on the IRX?

I’ve attached the IRX’s MIDI CC list below for assistance.

Finally, another question is regarding the Mvave Chocolate Plus pedal. Besides the wireless option, it has USB MIDI and P2 inputs (as shown in the attached image). Is it possible to use it in conjunction with the H90?

Thank you.

Hello.

After making the configurations I indicated, how can I map the PC commands on the H90 to their corresponding inputs on the IRX? Would it be through the control assignments in the H90 control app?

For example, I have a preset with chorus and delay, and I want it to correspond to a preset on channel 1 of the IRX when activated.

On the other hand, in another preset with delay and reverb, I want it to correspond to a preset on channel 2 of the IRX when activated.

Regarding the Mvave, I was referring to the standard P2 input, which in the photo above is indicated with the term “pedal”. I was wondering if I can use it with a TRS cable (using a P10/P2 adapter, of course) and connect it to the H90’s expression input to obtain an external auxiliary switch, or even with a TRS MIDI cable as you suggested.