Problem with dual routing

Home › Forums › Products › Stompboxes › Problem with dual routing

Viewing 2 reply threads
  • Author
    Posts
    • January 2, 2026 at 1:28 am #194125
      albertoplen
      Participant

        I have a Diezel Herbert Mk3, h90 works perfect in the loop, and works perfect in the input, but it doesnt sound anything if I connect in dual routing, 4CM mode (in/out 1-1, loop 3-3).

        Is there someting more I must do?

      • January 2, 2026 at 9:33 am #194129
        tbskoglund
        Keymaster
        Eventide Staff

          Hello,

          Did you setup the H90 be in Dual Mode? https://cdn.eventideaudio.com/manuals/h90/1.9.7/content/edit-modes/routing.html

          Full instructions for 4CM / Pre/Post mode can be found here: https://cdn.eventideaudio.com/manuals/h90/1.9.7/content/setup/pre-post.html

        • January 2, 2026 at 11:35 am #194135
          albertoplen
          Participant

            Thanks for replying.

            I don’t know what the problem was because I think I did the same thing as the previous 10 times, but now it works fine!

            The only thing is, I had to change the bypass type to Relay, which I’m not entirely sure what it does, but otherwise, the amp didnt sound work with the H90 deactivated, and with the”relay” mode, I have the amp, the preset in pre, and the preset in post. So, perfect!

            Cheers

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.