H90 MIDI change program and set to bypass

This topic has 6 replies, 4 voices, and was last updated 10 hours, 56 minutes ago by Bluefish.

Viewing 6 reply threads

Author

Posts
- January 28, 2026 at 4:04 pm #194425
  Bluefish
  Participant
  Is there a way to send a PC to change the program and simultaneously send a CC to switch it to bypass? Got it figured out on the H9, but for some reason the H90 will not do both. I know I can save a program as bypassed, but sometimes I need the program to start active and sometimes bypass. It would be loads easier if I did not have to have two programs with the same presets for a bunch of programs. I am using a Boss ES-5 to send the MIDI commands.
- January 29, 2026 at 11:52 am #194434
  tbskoglund
  Keymaster
  Eventide Staff
  This is currently not supported, but it’s on our todo list for a future update.
- January 29, 2026 at 2:54 pm #194437
  Bluefish
  Participant
  Bummer. Thanks for letting me know. Saves me some fruitless futzing.
- February 1, 2026 at 1:54 am #194469
  Huntiboo
  Participant
  If your midi switcher can add in a delay action before sending the CC, the H90 is ready to receive a cc approx 300-350msec after changing programs
- February 2, 2026 at 10:05 pm #194482
  Bluefish
  Participant
  Unfortunately, I am not finding that in the manual. I will keep digging. Thanks for the suggestion.
- February 4, 2026 at 1:28 pm #194495
  PhilippeG
  Participant
  I select H90’s programs from MobileSheets appli.
  
  In the midi command, I send first a PC to select the program, then a CC to turn of the footswitch P.
  
  So, the program is avalable but not active at the beginning of the song.
- February 4, 2026 at 10:01 pm #194496
  Bluefish
  Participant
  That is an interesting idea. Thanks
Author

Posts

Viewing 6 reply threads

You must be logged in to reply to this topic.