you can set the number of banks
The factory default sets the number of active Banks to 50. To limit the number of active
Banks:
1) Press and hold the Encoder and Right Footswitch simultaneously for a few
seconds to enter System Mode. Release the Encoder.
2) Turn the Encoder until [UTILITY] is displayed.
3) Momentarily press the Encoder.
4) Turn the Encoder until [BANKS] is displayed.
5) Momentarily press the Encoder.
6) Press the Left Footswitch and turn the Encoder to set the lower Bank limit.
7) Press the Right Footswitch and turn the Encoder to set the upper Bank limit.
8) Press and hold the Encoder and Right Footswitch simultaneously for a few
seconds to exit System Mode.
