Thank you for your answers.
First let me say i was not aware of the changes you mentionned, and i think these changes are great. Saving the Perform along with the Program is a wonderful idea (saves a few midi messages). But, as my playlist was working great, i did not noticed this change. So just for the sake of maybe detecting a bug, here is what i was doing.
H90 on MIDI channel 4. The chain goes from Mc6Pro (Midi Channel 1) through an HX Stomp (Midi channel 2) to the H90 In.
1)
In MIDI Global:
CC#98 assigne to Select Mode (not relevant here)
CC#99 assigned to Bank Mode (not relevant here)
CC#100 assigned to Perform Mode
Calling Program 10 in Perform mode: i sent a CC#100 and a PC#10 to the H90 (MC6-Pro being the controlling machine). The order of these 2 messages was not relevant in previous firmware, but i noticed in the new firmware CC#100 must be launched before PC#10 or weird things happens.
That said, maybe it is connected to the new functionnality you pointed (and as i plan to remove these messages now that i know i can save the mode with the program, it is not a problem).
2)
I’ve got a program (let’s say Program 1) with P and A on by default (B is off) , and want to call this program AND deactivate P immediately..
in MIDI Global I’ve got
CC#14 assigned to P Act/Byp.
CC#1 assigned to Load.
Previous firmware. Launching PC#1 and CC#14 with a value of 127 was deactivating P. Not working on new firmware
Also tried PC#1 and CC#14 with a value of 0 (no more effect).
But (new firmware) : Launching PC#14 and CC#1 with a value of 127 works. So that’s enough for me anyway.
Hope it helps, but, as i’ve said, No real deal : everything is working fine.
