3 channels mixed?

Home › Forums › Products › Stompboxes › 3 channels mixed?

Tagged: 

Viewing 2 reply threads
  • Author
    Posts
    • January 19, 2025 at 6:59 am #187819
      efekizildogu
      Participant

        Guys i am connecting a TONEX pedal on the insert one, in the picture I attached I am showing you the situation, I am splitting the signal to 3 and the bypassed insert 2 channel in the middle is just dry TONEX (this is what I want to ask, did I just achieve what I am writing?) and chorus and delay are parallel. Am I right? So did I just achieved one dry and two wet stereo effects?? Am I Brian May now?

         

         

        Attachments:
        You must be logged in to view attached files.
      • January 20, 2025 at 2:29 pm #187831
        joecozzi
        Moderator
        Eventide Staff

          Hello,

          Yes, you have your dry signal coming out of the first ToneX split into three paths. Please note that while the delay and chorus are in parallel, it may be a good idea to run those two stereo effects in Kill dry and control their levels using their respective output Mix levels. Otherwise, you run the risk of mixing three copies of your dry signal together and it may make the dry signal louder than it needs to be.

        • November 8, 2025 at 6:24 pm #193186
          vicin
          Participant

            <p style=”text-align: left;”>Hi there,</p>
            <p style=”text-align: left;”>I have a question about latency in this setup.</p>
            <p style=”text-align: left;”>If the mix setting is set to 100% for Insert 1 and 0% for Insert 2, will the signals coming from Outputs 1 & 2 (wet) and Output 4 (dry) have the same latency?</p>
            For example, if I send them directly to the PA, will the dry and wet signals reach it at roughly the same time?

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.