H90 routing question

[Anti-Gravity_Club]

🎸->Comp -> *H90(In1) -> wah -> fuzz -> OD -> H90(out1) -> Pre-amp/front of amp*

fxloop send->H90(in3)-> [lofi pedal]-> H90(out3)-> eq pedal-> fx loop return

* insert 1

[ ] insert 2

This is my planned signal path and I wanna know if that would work. On top of that i want to know if I plug out 4 of the h90 into my recording interface will I get a stereo signal?

[tbskoglund]

Hello,

Sorry, I’m not able to follow your diagram. The legend states that * indicates Insert 1, but you have the following shown: *H90(In1) -> wah -> fuzz -> OD -> H90(out1) -> Pre-amp/front of amp*

So which part of this path is Insert 1 on the H90?

When using Insert routing, Inputs/Outputs 1-2 are the main path, and I/O 3-4 are used for the inserts (either 2 mono inserts, or 1 stereo insert.)

If you connect outputs 1-2 to your interface, you will have a stereo signal.

If you have not yet looked at some of our setup diagrams, I would suggest starting here: https://cdn.eventideaudio.com/manuals/h90/1.9.7/content/setup/two-mono-inserts.html

[Anti-Gravity_Club]

<p style=”text-align: left;”>I meant for that section to be insert 1 via insert mode in the h90. So the wah to the preamp would all be insert 1 in the h90 insert mode.</p>
i was trying to fillow this routing path if I could just so I could also use the amp drive. Although the path you gave me would also work if I dont have another choice 

[Anti-Gravity_Club]

<p style=”text-align: left;”>I meant for that section to be insert 1 via insert mode in the h90. So the wah to the preamp would all be insert 1 in the h90 insert mode.</p>
i was trying to fillow this routing path if I could just so I could also use the amp drive. Although the path you gave me would also work if I dont have another choice 

[tbskoglund]

Hello,

You could use the above diagram, and you could then use Insert 2 as a send to your audio interface, but it would just be a mono signal.

[Bob Foster]

DI’s will work as splitters anywhere in your routing for your outputs and clean up most signals to your interface and/or amp. DI’s expand routing options. I have 8 DI’s (overkill – nothing spendy). I have direct (mono right from guitar), partial, and full (both stereo) routing to 5 different channels on my interface. At a gig I simplify, but always take 2 DI’s to split for FOH/Monitors and my amp.

[Anti-Gravity_Club]

Ooo that’s a really good idea thank you I’ll look into that thank you!

[Author]

Posts