I’ve been trying to setup my MC6M2 to switch Active/Bypass one one switch and Flex/Learn on another. I’m just trying to replace a separate footswitch (that works great) with my MIDI pedal.
I was hoping to find suggestions here because Morningstar forum only has H9 posts.
I have the H9 control app and it works with the PF but there’s no Flex/Learn CC assign so the terminology is different and confusing.
Act/Byp switch works good using CC35,
MC6- Action 1=Press, CC=35 Val=127
Action 2, Press, CC=35, Val-0
However the Flex/Learn switch isn’t acting correctly
MC6-Action 1-Press, CC41, Val 127
Action 2, Press, CC41, Val 0
I’ve tried the Flx/Lrn switch with Toggle mode and that makes PC changes and other weirdness.
Thanks!
.
