Synching MF with TF

Home › Forums › Products › Stompboxes › Synching MF with TF

  • This topic is empty.
Viewing 4 reply threads
  • Author
    Posts
    • November 21, 2009 at 5:51 pm #106664
      Billy Foppiano
      Participant

        Is there a way to do this via MIDI?

        Like hooking a didgitech 3 way swithcher, 1 switch is tap tempo into TF, which would go to MF via Midi…..Don't want program change to be initiated, just tap tempo…

      • November 23, 2009 at 5:22 pm #119546
        achaput
        Moderator

          Hi Billy,

          If you just want to sync tempos between stompboxes then turn MIDI CLK OUT to ON on the Master pedal and turn MIDI CLK IN to ON on the slave pedal.

          Make sure that CTL XMT and PGM XMT are set to OFF on the Master so that it won't transmit MIDI CC or Program Change messages.

        • November 23, 2009 at 10:28 pm #119551
          Billy Foppiano
          Participant

            Wow, thanks….Is this possible with the older software (2.)?
            I have the Mod in the beta, I had no trouble with it, but the TF sqealed like a pig..

            Got the boxes at the gig, but if this works, I'll go early and adjust

            Cheers,
            Billy

          • November 24, 2009 at 5:37 pm #130674
            achaput
            Moderator

              MIDI Clock OUT is new in the latest TF and MF software. MIDI Clock IN option was in the old software, simply called MIDI CLK.

              If you only updated ModFactor then you can use that as the master and it should work without updating TimeFactor. If you find you have timing problems then you will want to update TimeFactor as the MIDI timing has some improvements in the new software.

            • November 24, 2009 at 6:49 pm #130676
              Billy Foppiano
              Participant

                Thanks sooooooo much for your timely and accurate, detailed response! You guys are a great model for the other companys…..This stuff is important ta us!

                Billy

            • Author
              Posts
            Viewing 4 reply threads
            • You must be logged in to reply to this topic.