Two questions about the TIme Factor

Home › Forums › Products › Stompboxes › Two questions about the TIme Factor

  • This topic is empty.
Viewing 2 reply threads
  • Author
    Posts
    • October 20, 2010 at 8:33 am #107331
      Phlppe

        Hello,

        I'm thinking about buying a Time Factor and I was wondering about two things:

        – The delay is limited to 3 sec., does it mean that if I turn the tempo on, the BPM can't be set below 80 BPM? I mean, if I choose a 60 BPM tempo and a delay corresponding to a whole note, then the delay will go up to 4 sec. Is this possible?

        -Can I use my MPC to adjust the tempo's TF?

        (I read that there was some troubles with the synchronisation, when the TF is in a slave mode)

        Thank you and pardon my english!

      • October 20, 2010 at 3:10 pm #120872
        nickrose
        Moderator
        Eventide Staff

          The delay is indeed limited to 3 seconds – this means it cannot be increased beyond this.

          Not sure what an MPC is. TF will receive MIDIclock, but there have been some complaints that it will not handle a very bad signal.

        • October 20, 2010 at 4:50 pm #120875
          Doug Wellington

            Akai MPC – drum machine/sequencer/sampler

            http://en.wikipedia.org/wiki/Music_Production_Center

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.