Timefactor tap tempo problem

This topic is empty.

Viewing 6 reply threads

Author

Posts
- May 14, 2012 at 10:32 pm #108743
  hywelg
  Found this out tonight at rehearsal, I do not usually use a tap tempo setting.
  
  Anyway, using my usual delay patch, switch to play mode, change delay time to ¼ and tempo ON, tempo light is flashing. Tapping the tap switch does not change the tempo.
  
  I have to turn tempo off , tap the tempo again then turn tempo On for it to update the speed.
  
  I tried the same with one of my delay patches on the Pitchfactor and it works fine.
  
  Both are v3.0
  
  Any ideas?
- May 20, 2012 at 1:38 pm #123451
  hywelg
  Anyone?
- May 20, 2012 at 10:45 pm #123453
  ccl117
  Participant
  Not sure if this will do it, but I was just having similar issues with my TimeFactor. The tap tempo lights would blink in sync with my tap pedal (via MIDI cc commands on my floor controller), but the tempo would not change. Found out that my MIDI Clock setting on the pedal was turned on, which trumped any tap tempo control for me. I went into the settings under MIDI CLK and turned it off, now my tap tempo works great. Hope this helps
- May 23, 2012 at 8:49 am #134561
  hywelg
  Yes indeed that was it. Works great now thanks.
- December 9, 2012 at 1:21 am #135058
  lehman.brooks
  Thank you soooo much, my tap tempo hasnt worked for a loonng time and i could never figure it out.
- December 9, 2012 at 2:08 am #135059
  ccl117
  Participant
  Sweet!
- March 7, 2014 at 4:11 pm #136250
  igrik3v
  Participant
  Great! it realy helps, thank you!
Author

Posts

Viewing 6 reply threads

You must be logged in to reply to this topic.