H8000FW 5.6b3 issue

Home › Forums › Products › Rackmount › H8000FW 5.6b3 issue

  • This topic is empty.
Viewing 3 reply threads
  • Author
    Posts
    • January 28, 2013 at 2:50 pm #109536
      violetpow
      Participant

        Hello Nick,

        i updated the firmware to 5.6b3 and get an error on Midi.

        My H8000 is audio connected via ADAT, gets Midi and workclock from a RME Fireface 800 connected to a Mac Pro.

        In order to edit the patches in the H8000 i connected a PC via Firewire to the H8000FW also.

        This works since years, but after updating i get an error "Midi Overload 1 occurred" if i recieving a patch to the PC while the Mac is sending Midi clock.

        After the error occured on the screen the wordclock jumps out of syncing correctly.

      • January 28, 2013 at 3:36 pm #124235
        nickrose
        Moderator
        Eventide Staff

          Sorry – it sounds like the combination of MIDIclock and patch editing is overloading the MIDI capabilities of the unit. Since you presumably don't need to do the patch editing very often you should probably disconnect the MIDIclock at that time.

        • June 17, 2013 at 5:28 am #124564
          ThreeFingersOfLove
          Participant

            So, when is this release ready? We have been waiting for a loooong time.

          • June 17, 2013 at 10:42 pm #135420
            nickrose
            Moderator
            Eventide Staff

              Won't be long, but not many new big changes.

          • Author
            Posts
          Viewing 3 reply threads
          • You must be logged in to reply to this topic.