H9 Power Requirement

Home › Forums › Products › Stompboxes › H9 Power Requirement

  • This topic is empty.
Viewing 6 reply threads
  • Author
    Posts
    • June 1, 2013 at 6:29 pm #110958
      ericberumen

        I am running two Voodoo Labs Pedal Power 2 Plus' and I only have 3 power spots left. The 5/6 slots are being used for my Timefactor. What is the minimum power requirement for the H9?

      • June 3, 2013 at 4:54 pm #124530
        elevenstrings

          I'm interested in knowing the mA and power (hopefully -9v) for the H9.  I use a CIOKS DC-10. Thanks.

        • June 3, 2013 at 6:34 pm #124531
          Styrioci
          Participant

            I believe it's same as factor pedals

          • June 4, 2013 at 5:38 pm #124537
            AAgnello
            Moderator
            Eventide Staff

              Will accept range from +9V to +12VDC @4.5 W. 

            • June 4, 2013 at 6:58 pm #135403
              elevenstrings

                I just did a watt to mA convesion and it came back with 4500 mA – I think the highest my pedal supply goes  (Cioks DC-10) is 400 mA – how does this work with power supplies or will I have to use an AC adapter?

              • June 4, 2013 at 7:08 pm #135404
                elevenstrings

                  Got this from Poul at Cioks:

                  "You should power the H9 with 12V DC and use the green Flex cable. 4.5W corresponds to 375mA @ 12V DC. This means you should use the 12V outlet of a 400ma section and leave the associated 9V outlet not used (one to the left from the one used for the H9)."

                • June 5, 2013 at 7:57 am #135407
                  Styrioci
                  Participant

                    does this mean that 300mA output on my Cioks DC8 was enough for Factor pedal, but it's not sufficient for H9 and I'll need to combine 100+300mA outputs @12V to power H9? or can I safely power H9 with 300mA output of DC8 as I powered Factor pedal?

                • Author
                  Posts
                Viewing 6 reply threads
                • You must be logged in to reply to this topic.