Space Aux pedal problem

This topic is empty.

Viewing 5 reply threads

Author

Posts
- May 28, 2014 at 3:36 am #111649
  chrisjnyc
  I setup 2 DIY aux pedals. Both are just one switch that I have for my Timefactor and Space. Aux pedal 1 is working fine for the Timefactor (tap tempo), but aux pedals 2 will not do anything on the Space. When I switch the cables, aux pedal 1 does nothing on the Space, and aux pedal 2 controls the tap tempo on the Timefactor… any ideas?
- May 28, 2014 at 3:20 pm #126001
  nickrose
  Moderator
  Eventide Staff
  Sounds like you have a bad cable …
- May 28, 2014 at 3:32 pm #126003
  chrisjnyc
  I was thinking that too, but if its a bad cables… why would it work on the Timefactor? Both Aux pedals work on the Timefactor, but none work on the Space.
- May 28, 2014 at 3:49 pm #136727
  nickrose
  Moderator
  Eventide Staff
  Alternatively, it may be the setup on the Space. Connect one switch to it, and use the LEARN feature to see if you can get any life from it.
  
  Another way to test the switch is to connect it to the pedal input (tip and sleeve) – pressing it would be the same as pedal down.
- June 10, 2014 at 10:15 pm #136795
  chrisjnyc
  Hmmm… something is off on my Space. I bought a new Digitech FS3X, and it is only changing the "tip" Space settings. To make it more confusing, 2 of the 3 Digitech switches are changing the "tip" settings (in this case tap tempo), and the 3rd Digitech switch does nothing.
- June 10, 2014 at 10:50 pm #136796
  nickrose
  Moderator
  Eventide Staff
  If you are sure it is the Space, support@eventide.com
Author

Posts

Viewing 5 reply threads

You must be logged in to reply to this topic.