H9 - tuner and aux switch - Eventide Audio

This topic is empty.

Viewing 5 reply threads

Author

Posts
- February 13, 2015 at 11:15 pm #112341
  kombinateur
  Participant
  Is it possible to use an expression pedal and single mono non-latching aux switch (as recomended) for turning up/down the tuner by one pressing of the switch, please?
  
  And btw, aren't there any plans to firmware update to enable one switch turning up of the tuner? Press and hold would be sufficient for example.
- February 13, 2015 at 11:23 pm #127538
  gkellum
  Participant
  I'm not 100% sure what you're asking. There is a pedal function called "Toggle Tuner" which you can find in H9 Control under Pedal Settings / Aux Switch Mappings, which toggles the tuner on and off again. You can assign it to a single button Aux switch. Pressing the aux switch once will turn the tuner on, and pressing it again will turn the tuner off.
- February 13, 2015 at 11:29 pm #138251
  kombinateur
  Participant
  Yes, that's it. I'd like to make sure it works even with non-latching switch and expression pedal connected via Y cable. Thank you!
- February 13, 2015 at 11:36 pm #138252
  kombinateur
  Participant
  Yes, that's it. I'd like to make sure that it works even with an expression pedal and non-latching connected via Y cable. Thank you!
- February 13, 2015 at 11:38 pm #138253
  kombinateur
  Participant
  And what about the firmware update to enable press and hold to turn the tuner on. Is it possible in the future?
- July 5, 2015 at 2:08 pm #139567
  rlynch
  New to Eventide and H9 so I have a question about tuner function. How can I get the tuner to work with G2 ? need tuner to show up when I press a preset switch on g2. thanks
Author

Posts

Viewing 5 reply threads

You must be logged in to reply to this topic.

H9 – tuner and aux switch