H9 - Right and Left Issues

This topic is empty.

Viewing 4 reply threads

Author

Posts
- October 1, 2015 at 2:13 pm #112901
  satch4u4
  Participant
  Hi – I am currently using an H9 in the stereo loop of my Axe Fx 2. My issue is as follows…for example: On the Diatonic Algo I am only hearing one harmoney. I have Pitch A set to -5 and Pitch B at -3. With the Pitch Mix set to A10+B10 I am only hearing Pitch A. When I set the Pitch Mix at A0+ B10 I hear no harmony at all. So I am not hearing Pitch B at all, no matter where I set the Pitch Mix. Any idea whats going on here?
- October 1, 2015 at 2:14 pm #140798
  nickrose
  Moderator
  Eventide Staff
  This is probably a silly question, but are you using 2 mono cables in and 2 out, of the H9 ? You will need this to get a true stereo signal.
- October 1, 2015 at 3:33 pm #140800
  satch4u4
  Participant
  Yes they are just standard guitar cables two going in are two George L cables and the two going out is another George L cable along with another standard guitar patch cable.
- October 1, 2015 at 3:36 pm #140801
  satch4u4
  Participant
  Thats the other odd thing. I can get stereo delays going on each side. I tested this by using different time divisions. I can roll the Delay mix back and forth and hear each sides set time division. It’s the oddest thing.
- October 2, 2015 at 11:08 am #140823
  satch4u4
  Participant
  For anyone who is interested, my issue was with settings on my Axe Fx 2. The Output 2 under the I/O menue was set to Left Only. Changed it to Stereo. Bam! Stereo image gooeyness!
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.

H9 – Right and Left Issues